VS: [EladSDR] FDM-SW2 Update


Otso Ylönen
 

Hello,

 

Yes, when playing back, I am normally offline, and without a receiver connected to the Computer at all.

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: tiistai 25. tammikuuta 2022 8.44
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Otso, when you play back, you are in ONLINE mode or OFFLINE mode ? I.e. you run the SW2 with the GO button or with the OFFLINE button ?

Regards,

Vianney

Il 24/01/2022 17:14, Otso Ylönen ha scritto:

Thanks Vianney! Number entry to BW and filter fields work as expected now.

 

Regarding Station Memories, clicking on the rows on the list (see my earlier post) does nothing but changes the mode as I am playing back 1.5 MHz MW recordings and trying to jump to another MW frequency using the Station Memories window. During playback, the whole 1.5 MHz range is displayed, therefore, I do not think ”I am tuning outside of the displayed span”, right? I must be doing something wrong if no-one else has this problem!

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: maanantai 24. tammikuuta 2022 14.10
Vastaanottaja: EladSDR@groups.io
Aihe: Re: VS: [EladSDR] FDM-SW2 Update

 


Version 3.54 should fix the issues on Notches and Filter BW.

Some information:
    - for a list of all shortcuts check here : https://www.eladit.com/get-file?path=sdr%2FFDM-sw2+Software%2FDoc%2FELAD+FDM-SW2+-+Quick-start+guide+-+rev+10.pdf
    - it is not possible to tune outside the span displayed during a playback,
    - the equalizer is disabled in OFFLINE mode.

Regards, and thank you for your comments,

Vianney


Il 22/01/2022 18:40, Otso Ylönen ha scritto:

Yes, same here with the BW entry. I suppose there is really just one reson for these two findings: all number input is currently sent to the main frequency field.

 

As I use the TM-2 when playing back files, I seldom need to enter anything to the BW field.

 

 

 

I would like to know if the memory window works for anyone else. I.e. can you jump to the frequencies saved into Station Memories when playing back files?

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Bill Nollman
Lähetetty: lauantai 22. tammikuuta 2022 16.39
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 

Sorry to report another (possible) v3.53 bug.

  1. I can no longer double click on the number in the Filter BW box and directly enter a bandwidth (for example 192000). Entering any number only changes the main frequency.
  2. The good thing is Z and X will step through the entries on the Demod Settings Tab / BW Presets (which I previously didn’t know about and works very nice!).

 

Is anyone else having the same problem? I was using v3.50 before this update with no problem.

 

Bill Nollman

Farmington, CT

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Otso Ylönen
Sent: Friday, January 21, 2022 5:16 PM
To: EladSDR@groups.io
Subject: VS: [EladSDR] FDM-SW2 Update

 

Hi Vianney,

 

I have done some testing already:

  1. I really like the possibility to use keyboard commands during playback, i.e. even if I use the mouse to jump within the time scale.
  2. The Ctrl-F & B are a nice addition, but as I like to use quite a long file size (over 30 min), 10% is often too much as a standard step. A possibility to set the percentage (in settings) would be a great thing.
  3. I have missed a way to quickly jump between frequencies during live sessions. Therefore, I believe I learn to like to Ctrl-Z/Y shortcuts.
  4. I was not able to figure out how to use the Station Memories window during file playback. I tried clicking with the mouse as well as several key presses on the rows. The only thing that changes is the mode, if defined with the memory entry. (This is how it has been earlier, too.)
  5. It seems that I cannot enter notch frequencies or related bandwidths by typing them into the respective fields anymore. Otherwise, I suppose that their usage with the new shorcut Q might be bit quicker now. I hope this bug will be quickly mended as I use both of the filters almost all the time when listening to MW files (to block adjacent channel QRM). I would actually like to have a couple of additional  filters!
  6. The equalizer har really never worked for me: It is disabled when I open the AF Window and the ”ON-button” is greyed out.
  7. Jump to start/end may turn out useful, but Ctrl-Shift-F does not take you to the next file. It takes you near the end of the current file and in my case with long files, you have to wait a wile before playback takes you to the next file. I would really appreciate proper jumping between the file sequence. Back and forth!

 

Thank you for your continued work on this great piece of software!

BR, Otso

 

 

I  have lot of memory entries, mostly MW offsets as well as ”watchlist for AM and FM:

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: perjantai 21. tammikuuta 2022 13.53
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Hello,

the version 3.53 of the SW2 software is available in the Under test folder along with some release notes.

The most important changes are:
    - possibility to change the background of the spectrum and to save on file all the colors that can be set by the software,
    - added the possibility to choose whether to display 9 or 12 digits for the Advanced Tuning window,
    - improved keyboard shortcuts management (with addition of new shortcuts),
    - added the possibility to use the memories even when playing a file,

    - improved software stability for the S3.

Regards,

Vianney

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

 

--
Vianney Colombat
ELAD Italy



Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

Join EladSDR@groups.io to automatically receive all group messages.