Re: Unable to Tune theART-60 from the FDM-DUO


Sorry to hear your problem, I would check the following:

The ART must have the tuner installed, of course, and set enabled via the front buttons on the ART.

Next It is really written in the manual long press on P3 for tuning, but on my Duo/-art I use long press on F4. (MODE button)

Suggest to check status of firmware and software to be updated.

Do not be afraid of raising a support ticket on this page: , they are happy to fix your problem, even remotely when your ART is connected to internet...

Join to automatically receive all group messages.