Elad Update and SW2 goodies


Paul Jones
 

Hey All,

 

So just a little update, at my last conversation, everyone at the factory in Italy is doing OK, No infections, but that can change daily, but so far so good. Everyone is at home

Franco was at the factory for a while, but now EVERYONE is working from home.

 

Not sure if you had seen but there is a new Test version of SW2 (3.033) in the Undertest folder, I’ve found it very stable and it has some nice changes, the Frequency Display is slightly larger

And a request we had at Dayton 2 years ago has made it in, the panel behind the volume controls is now highlighted with the matching RX color, so it is easy to see at a glance which volume

Control needs to be used for the active RX. This needs to be turned on in the SET menu under graphics, and you can set the opacity in the color page

 

A screenshot of a computer

Description automatically generated

This is at 50% on RX1

 

 

Set the 3 check boxes to apply then if you want is more opaque the click on edit color settings

 

Here are the latest changes to SW2 and this is available under http://eladit.com/download/sdr/FDM-sw2%20Software/Under%20test/index.php?lang=EN

 

--> Version 3.033 / March 24, 2020

  - enlarged frequency viewing

  - added the possibility to press Enter to start the FDM-SW2 when the FDM

    devices selection window appears

  - added in the Graphics tab of the Setup window some options to:

    - 1. highlight the selected receiver in the volumes panel: the volumes

      of the selected receiver are colored with the color of the receiver, it is

      possible to change the transparency of the color using the

      "Color Settings" window

    - 2. color the step value with the color of the selected receiver

    - 3. color the mode, the band filter and the AGC with the color of the

      selected receiver

  - changed the color management on the Advanced Tuning window:

    - 1. if "Local Oscillator" (center frequency of the spectrum) is chosen, the

      color remains the default one

    - 2. if you select "Selected Receiver" (selected receiver frequency) the

      color becomes that of the selected receiver

  - recorder/player:

    - 1. modified the graphic part of the recorder/player especially for as

      regards the colors, the aim is to better highlight the different cases:

      turned off, recording scheduled, recording in progress and playing in

      progress

    - 2. added the following keyboard shortcuts:

      - CTRL+L for LOOP PLAY

      - CTRL+R for RECORD

      - CTRL+P for PLAY and PAUSE

      - CTRL+S for STOP

    - 3. fixed the window for entering the name of the recording so that it is

      easier to start recording

    - 4. fixed the Recording Scheduler window and the Recording tab of the

      Setup window so that the controls are clearer

  - added support for CWR mode for Omnirig

  - fixed issue on the CAT 0xF7 TRANSCEIVER STATUS command (inverted again the

    status in the answer), added the possibility in the Setup window to invert

    the answer state of this command (this is for compatibility with some

    proprietary software)

  - fixed issue that set the focus incorrectly after having set the frequency

    with the keyboard (digits + entere key)

  - FDM-DUO:

    - 1. fixed some minor errors in macro creation

    - 2. fixed problem when closing the Stand-Alone panel

    - 3. fixed the fact that after starting the software, and activating the

      transmission on a virtual receiver the input options for transmission were

      set to software defaults (KEY and MIC), now the software reads the value                           

      set on the FDM-DUO (the AUTO choice for the TX IN menu of the FDM-DUO,

      menu 32, is not yet supported)

     

--> Version 3.032 / February 21, 2020

  - OmniRig management:

    - corrected issue in reading the frequency

    - fixed some issues on rig2 management

    - optimized general management of OmniRig

    - removed LockToCF on RX1 and Lock ABS on RX2

  - continued extension of the supported frequency range, including at graphic

    level for frequency display

  - added the possibility to delete a frequency digit with the backspace key

    of the keyboard typing a frequency

  - added shortcut to Lock ABS with the letter O on the keyboard

  - updated quick start window

  - modified the Advanced Tuning window, removed some features with malfunction

  - improved closing management of the software

  - updated the dll for the FDM-S3 (file ExtIOmc_ELAD_FDMS3_v0_22_0_2.dll)

  - slightly revised the graphics of the setup window

 - TMate2 management:

    - corrected an issue in saving the settings

    - lowered the default value of the LCD refresh time (100ms)

    - added the possibility in the setup window to choose presets as regards

      the management of the main knob

     

--> Version 3.031 / January 16, 2020 (alpha version)

  - extended to channel 2 the fix of startup crash due Hz/kHz setting

 

--> Version 3.030 / November 28, 2019 (alpha version)

  - start of TMmini management

  - fixed startup crash due to Hz/kHz setting

 

--> Version 3.029 / August 1, 2019 (alpha version)

  - updated the dll for the FDM-S3 (file ExtIOmc_ELAD_FDMS3.dll v0.21)

  - fixed an issue in the visualization of the current configuration near the

    serial number of the connected FDM device

          

--> Version 3.028 / April 24, 2019 (alpha version)

  - started extension of the supported frequency range

 

 

 

Have a Radiolutionary Day!
Paul

--

Paul Jones - Elad USA Sales & Technical Support (USA)

FDM-Duo, Duo-Art, FDM-DUOR,  FDM-S3, FDM-S2, FDM-S2, FDM-SW2, T-Mate

Visit http://www.eladit.com for the full range of Elad Products or USA Sales : https://shop.elad-usa.com/

Email Support Group - https://groups.io/g/EladSDR

Sales Phone: 312.320.8160

Support Email: support@... Sales Email: sales@...
Personal Email: Paul@...
 
 

 

 

Join EladSDR@groups.io to automatically receive all group messages.