Hello Mark,
Ok then, Saturday next week it is. While I will be connected to
your PC, we will need to talk. By telephone ?
73, Alain F4HFS
Le 08/01/2020 à 00:37, Mark Gottlieb a
écrit :
Alain,
This
Saturday morning, my time, I will not be available. We can
look at the next week if you like. I am in no urgent hurry
and appreciate your offer of assistance.
73
Mark
KK2L
OK, sure.
As I am working for a living, Saturday would be just fine. I
will see my son and my grand daughters on Sunday. Could be 9
or 10 AM your side ( 3 or 4 PM in Paris ) as you prefer.
73, Alain
F4HFS
Le 07/01/2020 à 21:24, Mark Gottlieb a
écrit :
Alain,
I
like the TeamViewer idea. We have a 6 hour time
difference so I imagine a weekend day would be most
convenient for you. Let me know. Merci Beaucoup!
73
Mark
KK2L
Mark,
Your 2 macros run just fine on my DM780. I do not see
anything wrong. I attached the shots where you can see how
I've set them up.
Did you do anything different ?
The only other way I see to help you is you give me a
remote access to your computer (using team viewer) and I
would compare your settings with mine. Or you could call
the HRD help.
Have you another idea ?
Alain F4HFS
Le 07/01/2020 à 03:47, Mark Gottlieb a
écrit :
No
luck, yet, but I think I am getting closer. Here are
two of my macros. Neither one will go into TX when I
click Send. Do you see something wrong in the way they
are written?
#++
#
#
End of a reply to the other station, his callsign
#
is taken from the Add Log Entry Callsign field.
#
#--
#
<his:callsign>
<his:callsign> de <my:callsign>
<my:callsign> I am reading you 599 599. The name,
here, is Mark. How Copy? BTU <his:callsign> de
<my:callsign> pse kn <stop>
#++
#
#
QRZ, stops TX when all text sent.
#
#--
#TX
0 // TX = Off
QRZ
QRZ QRZ de <my:callsign> <my:callsign>
<my:callsign> pse k <stop>
73
Mark
KK2L
Sorry
Mark, I did not help.
other thoughts on the macro side. please check in the
macro window :
- Are the macros enabled ? (checkbox at the top left)
- Do you need the text to be sent immediately ?
(checkbox)
- Do you have a mode enabled in the "Enable By Mode"
window ?
I use the macro by first displaying the text in the TX
window for possible edition, and then I send the text
using the send button (DM780).
Do you have another TRx which HRD/DM780 would properly
work with ?
What is your version of HRD + DM780 ?
73,
Alain F4HFS
Le 06/01/2020 à 21:28, Mark Gottlieb
a écrit :
Hello
Alain,
I
have HRD already configured as you describe here. The
TX button, in the radio section, in DM780 will key up
the radio if I manually apply it. My problem is that
when I am attempting to send a macro the radio will
not go in TX. I have attempted to set up with both
HRD and Mini-Deluxe 2.1, which takes less processing,
and I have achieved the same results in that the radio
will not go into TX unless I manually apply the
button. I am getting the exact same results with
the ELAD and with my FLEX 6400. BTW, I have been
using HRD since 2014. Thank-you for offering your
assistance.
73
Mark
KK2L
Hello
Mark, all,
Let's begin by the obvious. I'm using only the CAT
command for PTT.
1) DUO
- the PTT setup : I've set it at IN + RTS because I
use the RTS with wsjtx for the FT8. So for my using
DM780, IN alone is enough.
- CAT BitRate : 9600 b/s, so I can use my DUO with
MMSSTV. You may put whatever bitrate you want, but you
have to set the HRD connection accordingly, of course.
Sorry for the (very) obvious.
2) the CAT connection with HRD
NB : As DM780 needs the logbook to properly work, I
don't launch automatically DM780 at HRD startup. The
logbook is quite long to launch. HRD Rig control
launches first, then the log book. Once the logbook is
opened and stable, I launch DM780 from the logbook
window.
3) HRD Program options
4) DM780 program options
NB : take care to connect DM780 to HRD. You must do it
at least once. Then it is kept up.
All that is quite obvious. I don't expect you missed
any of them. The real trick is the next one. I bet you
missed this one :-).
5) DM780 (hidden) TX button
to show the tx button (green ellipse), you have to
click on the "Radio" button (red circle). This is only
for using it manually. With the DUO turned on, HRD
connected, DM780 connected to HRD, try and click on
the TX button. If the DUO don't transmit, that's it !
To program the TX button, you have to click on the
configuration button (blue circle). Then you click on
TX in the new "Configure Radio Pane" and you may chose
the action associated with the TX button. Personally,
I've trivially chosen the TX button to turn the DUO in
transmission (TX). I know, it's very common... I like
it this way. Please, don't ask me why they've done
that, ok ?
The real trick is that there is no default programming
in this button. When you install a new TRX connection,
DM780 will prompt you for programming the TX button,
only once. If you missed it the first time, there
won't be a second time.
Let me know your results. If none of this worked, we
would see what to do next.
73,
Alain F4HFS
Le 05/01/2020 à 22:18, Mark
Gottlieb a écrit :
Hello Alain,
I am still having the same issue. It is exactly the
same for my FLEX 6400 and my ELAD FM DUO so it must be
something simple that I am not doing to enable PTT
using these radios. I am able to manually click on
TX, in the radio section of HRD, and both radios will
go into TX mode. In addition, I have full audio
capability in terms of decoding and I do have rig
control, for both radios, where I can switch bands,
increase volume, etc. from HRD.
Please advise.
73
Mark
KK2L
--
Alain Reiner
--
Alain Reiner
--
Alain Reiner
--
Alain Reiner
--
Alain Reiner
|
