OK, sure. As I am working for a living, Saturday
would be just fine. I will see my son and my grand daughters on
Sunday. Could be 9 or 10 AM your side ( 3 or 4 PM in Paris ) as
Le 07/01/2020 à 21:24, Mark Gottlieb a
like the TeamViewer idea. We have a 6 hour time difference
so I imagine a weekend day would be most convenient for
you. Let me know. Merci Beaucoup!
Your 2 macros run just fine on my DM780. I do not see
anything wrong. I attached the shots where you can see how
I've set them up.
Did you do anything different ?
The only other way I see to help you is you give me a remote
access to your computer (using team viewer) and I would
compare your settings with mine. Or you could call the HRD
Have you another idea ?
Le 07/01/2020 à 03:47, Mark Gottlieb a
luck, yet, but I think I am getting closer. Here are two
of my macros. Neither one will go into TX when I click
Send. Do you see something wrong in the way they are
End of a reply to the other station, his callsign
is taken from the Add Log Entry Callsign field.
<his:callsign> de <my:callsign>
<my:callsign> I am reading you 599 599. The name,
here, is Mark. How Copy? BTU <his:callsign> de
<my:callsign> pse kn <stop>
QRZ, stops TX when all text sent.
0 // TX = Off
QRZ QRZ de <my:callsign> <my:callsign>
<my:callsign> pse k <stop>
Mark, I did not help.
other thoughts on the macro side. please check in the
macro window :
- Are the macros enabled ? (checkbox at the top left)
- Do you need the text to be sent immediately ? (checkbox)
- Do you have a mode enabled in the "Enable By Mode"
I use the macro by first displaying the text in the TX
window for possible edition, and then I send the text
using the send button (DM780).
Do you have another TRx which HRD/DM780 would properly
work with ?
What is your version of HRD + DM780 ?
Le 06/01/2020 à 21:28, Mark Gottlieb a
have HRD already configured as you describe here. The
TX button, in the radio section, in DM780 will key up
the radio if I manually apply it. My problem is that
when I am attempting to send a macro the radio will not
go in TX. I have attempted to set up with both HRD and
Mini-Deluxe 2.1, which takes less processing, and I have
achieved the same results in that the radio will not go
into TX unless I manually apply the button. I am
getting the exact same results with the ELAD and with my
FLEX 6400. BTW, I have been using HRD since 2014.
Thank-you for offering your assistance.
Let's begin by the obvious. I'm using only the CAT
command for PTT.
- the PTT setup : I've set it at IN + RTS because I use
the RTS with wsjtx for the FT8. So for my using DM780,
IN alone is enough.
- CAT BitRate : 9600 b/s, so I can use my DUO with
MMSSTV. You may put whatever bitrate you want, but you
have to set the HRD connection accordingly, of course.
Sorry for the (very) obvious.
2) the CAT connection with HRD
NB : As DM780 needs the logbook to properly work, I
don't launch automatically DM780 at HRD startup. The
logbook is quite long to launch. HRD Rig control
launches first, then the log book. Once the logbook is
opened and stable, I launch DM780 from the logbook
3) HRD Program options
4) DM780 program options
NB : take care to connect DM780 to HRD. You must do it
at least once. Then it is kept up.
All that is quite obvious. I don't expect you missed any
of them. The real trick is the next one. I bet you
missed this one :-).
5) DM780 (hidden) TX button
to show the tx button (green ellipse), you have to click
on the "Radio" button (red circle). This is only for
using it manually. With the DUO turned on, HRD
connected, DM780 connected to HRD, try and click on the
TX button. If the DUO don't transmit, that's it !
To program the TX button, you have to click on the
configuration button (blue circle). Then you click on TX
in the new "Configure Radio Pane" and you may chose the
action associated with the TX button. Personally, I've
trivially chosen the TX button to turn the DUO in
transmission (TX). I know, it's very common... I like it
this way. Please, don't ask me why they've done that, ok
The real trick is that there is no default programming
in this button. When you install a new TRX connection,
DM780 will prompt you for programming the TX button,
only once. If you missed it the first time, there won't
be a second time.
Let me know your results. If none of this worked, we
would see what to do next.
Le 05/01/2020 à 22:18, Mark Gottlieb
a écrit :
I am still having the same issue. It is exactly the
same for my FLEX 6400 and my ELAD FM DUO so it must be
something simple that I am not doing to enable PTT using
these radios. I am able to manually click on TX, in the
radio section of HRD, and both radios will go into TX
mode. In addition, I have full audio capability in
terms of decoding and I do have rig control, for both
radios, where I can switch bands, increase volume, etc.