1. Messages
  2. Microphone options

Re: Microphone options

Mike Penkas
 

Mic into 528e then into W2IHY IPlus 3 position interface with level controls for each switched output.  I then fed audio into a flex 5k, elad or ts990.  No other external amplification.
Mike WA8EBM


Sent from my Samsung Galaxy smartphone.


-------- Original message --------
From: Mark Gottlieb <kk2l@...>
Date: 12/27/19 17:16 (GMT-05:00)
To: EladSDR@groups.io
Subject: Re: [EladSDR] Microphone options

Great advice.  Thanks.  Is it safe to assume you were using an amp with the Symetrix 528e?

 

73

 

Mark

KK2L

 

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Mike Penkas
Sent: Friday, December 27, 2019 3:58 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] Microphone options

 

On 12/27/2019 1:26 PM, Mark Gottlieb wrote:

FB.  It looks like there is an adaptor (OPC-589), from ICOM, that goes from 8 pin modular to 8 pin male adaptor that is available.  This would allow me to use a variety of ICOM mics.  Of course, assuming that most ICOM mics are electret type with bias?  Just as an example, would my handheld from my IC-9100 work with the FM DUO using the adaptor?

 

 

73

 

Mark

KK2L

 

 

I built a adapter from one end of a short 8 pin network cable and a 8 pin male connector.

I have a whole box of Icom mics and I tried a HM12, HM23, HM36, HM151, HM154T, HM198 and even a SM6. 

They all worked with the ELAD.  The best one I have tried and am using now is the HM103 that came with my old IC706MKIIG.

It has the best sounding audio and output.  Also tried a PR-40 and RE27 N/D which were excellent thru W2IHY gear or a Symetrix

528E voice processor.

Mike WA8EBM
Join EladSDR@groups.io to automatically receive all group messages.