|
Current State of Northeast Area HamGates 8 messages
There are currently seven state HamGates in the Northeast for: CT, MA, ME, NJ, NY, PA & RI (DE, MD, NH & VT to be set up as needed) All HamGates are set up in full mesh format for forwarding in real t
There are currently seven state HamGates in the Northeast for: CT, MA, ME, NJ, NY, PA & RI (DE, MD, NH & VT to be set up as needed) All HamGates are set up in full mesh format for forwarding in real t
|
By
Charles J. Hargrove
·
|
|
Anyone in PA.USA.NOAM route to OH.USA.NOAM? 10 messages
I had a message to PA.USA.NOAM fail to be forwarded out of Ohio. My last PA gateway was KM8V.#CLE.OH.USA.NOAM, but that BBS is off-the-air. 73, Chuck
I had a message to PA.USA.NOAM fail to be forwarded out of Ohio. My last PA gateway was KM8V.#CLE.OH.USA.NOAM, but that BBS is off-the-air. 73, Chuck
|
By
Chuck Gelm NC8Q
·
|
|
Forwarding path to W1DTX.ME.USA.NOAM ? 6 messages
A personal message was forwarded to my BBS for W1DTX.ME, I don’t have a forwarding path to Maine? Does anyone have one or a contact email for this station? Nothing on qrz other than a PO Box. Maybe I
A personal message was forwarded to my BBS for W1DTX.ME, I don’t have a forwarding path to Maine? Does anyone have one or a contact email for this station? Nothing on qrz other than a PO Box. Maybe I
|
By
KA1VSC@gmail.com
·
|
|
State HamGate and VPN Info
Since this was asked for, I decided to share it with the rest of the group. There are currently six state HamGates that act as both a bbs and as a VPN hub using Wireguard. The HamGates are in Pennsylv
Since this was asked for, I decided to share it with the rest of the group. There are currently six state HamGates that act as both a bbs and as a VPN hub using Wireguard. The HamGates are in Pennsylv
|
By
Charles J. Hargrove
·
|
|
[44net] CORRECTION: 2023-01-21 Community meeting starts at 1800 UTC 2 messages
Here is the Zoom link for any that are interested in attending at 1PM ET today. -------- Forwarded Message -------- Subject: Re: [44net] CORRECTION: 2023-01-21 Community meeting starts at 1800 UTC Dat
Here is the Zoom link for any that are interested in attending at 1PM ET today. -------- Forwarded Message -------- Subject: Re: [44net] CORRECTION: 2023-01-21 Community meeting starts at 1800 UTC Dat
|
By
Charles J. Hargrove
·
|
|
EastNet Packet Web Site Update 2023-01
Members, Updates have been made to the web site: www.EastNetPacket.org * Cleaner look * Added 2023 meeting dates * Added Roster page * Added minutes from previous meetings * Updated Chromebook convers
Members, Updates have been made to the web site: www.EastNetPacket.org * Cleaner look * Added 2023 meeting dates * Added Roster page * Added minutes from previous meetings * Updated Chromebook convers
|
By
Chris Lance WW2BSA
·
|
|
K1MAL - CT packet access 3 messages
Chris, My station has a local footprint in Glastonbury. You can try KA1VSC-2 and -4 on 145.030 If you can get to a W1SP node, try to connect to COLCCT W1SP-3, then to my station If that fails, email m
Chris, My station has a local footprint in Glastonbury. You can try KA1VSC-2 and -4 on 145.030 If you can get to a W1SP node, try to connect to COLCCT W1SP-3, then to my station If that fails, email m
|
By
KA1VSC@gmail.com
·
|
|
Digipeat or node? 8 messages
Hello, I am trying to learn more about packet radio and have been tinkering with some TNC2 clones I have collected over the years. I am in a very poor spot in Waterbury for VHF and can only really hit
Hello, I am trying to learn more about packet radio and have been tinkering with some TNC2 clones I have collected over the years. I am in a very poor spot in Waterbury for VHF and can only really hit
|
By
Chris K1MAL
·
|
|
Let's visualize what "could be" for RF packet networks. 13 messages
Chris, WW2BSA has shared the data from his national packet map with me so that I could run some numbers to see “what if”. (https://www.google.com/maps/d/u/0/viewer?mid=1Fh1Ei9of2rGgB7OuBHjRAfW5LiNibYW
Chris, WW2BSA has shared the data from his national packet map with me so that I could run some numbers to see “what if”. (https://www.google.com/maps/d/u/0/viewer?mid=1Fh1Ei9of2rGgB7OuBHjRAfW5LiNibYW
|
By
Brian Webster N2KGC
·
|
|
basic packet setup?? 9 messages
Hi, I'm in the long island NY area i had a KPC3+ and radio setup for a bit but all i heard was 2 CT stations over 2 years. I'm considering putting the station back up. but wanted to consult with your
Hi, I'm in the long island NY area i had a KPC3+ and radio setup for a bit but all i heard was 2 CT stations over 2 years. I'm considering putting the station back up. but wanted to consult with your
|
By
Jeff KC2ZQO
·
|
|
2023 EastNet meeting date and times 2 messages
Realizing we haven’t publish the full schedule for 2023 and the EastNet calls, duration typically 2 hours: March 9th 7 PM June 17th 9 AM September 7th 7 PM December 8th 9 AM Join Zoom Meetinghttps://u
Realizing we haven’t publish the full schedule for 2023 and the EastNet calls, duration typically 2 hours: March 9th 7 PM June 17th 9 AM September 7th 7 PM December 8th 9 AM Join Zoom Meetinghttps://u
|
By
Brian Webster N2KGC
·
|
|
EastNet Member Roster 5 messages
Dear Members, I'm compiling a list of EastNet Packet Members specifically for the web site. If you are connected to EastNet with a node/BBS or any other way I should know of, then please email me your
Dear Members, I'm compiling a list of EastNet Packet Members specifically for the web site. If you are connected to EastNet with a node/BBS or any other way I should know of, then please email me your
|
By
Chris Lance WW2BSA
·
|
|
Next Zoom Meeting
March 9, 2023. 7:00 pm Eastern Local. UGH! I have year WRONG at the bottom of the www.EastNetPacket.org home page. I will fix. Zoom link is good. Chris ww2bsa webmaster On 01/18/2023 11:24 AM EST Jeff
March 9, 2023. 7:00 pm Eastern Local. UGH! I have year WRONG at the bottom of the www.EastNetPacket.org home page. I will fix. Zoom link is good. Chris ww2bsa webmaster On 01/18/2023 11:24 AM EST Jeff
|
By
Chris Lance WW2BSA
·
|
|
Why are there no 56K modems/TNCs? 33 messages
Any true techy types want to tell me why the technology is stuck at 1200bps when people were doing 56K in 1996? I just read this and with cheap microprocessors that beat out anything we use on 9600bps
Any true techy types want to tell me why the technology is stuck at 1200bps when people were doing 56K in 1996? I just read this and with cheap microprocessors that beat out anything we use on 9600bps
|
By
Ronny Julian K4RJJ
·
|
|
TONIGHT: MidAtlantic Packet Meeting - January 14 at 7:00 pm
Hello everyone. Our sister RF Packet Group, the MidAtlantic Packet Group meeting will be held this Saturday , January 14 via Online Zoom Video Conference starting at 7:00PM ET. All are welcome to atte
Hello everyone. Our sister RF Packet Group, the MidAtlantic Packet Group meeting will be held this Saturday , January 14 via Online Zoom Video Conference starting at 7:00PM ET. All are welcome to atte
|
By
Chris Lance WW2BSA
·
|
|
The future of packet radio... 7 messages
An idea for future packet conferences: Discuss with other groups about developing an upgraded packet system. That would be hardware and software. It has long been established that Flexnet and (x)net a
An idea for future packet conferences: Discuss with other groups about developing an upgraded packet system. That would be hardware and software. It has long been established that Flexnet and (x)net a
|
By
Vincent N2OHH
·
|
|
WA2SNA NODE: Status Update 7 messages
Today, I visited the tower site for WA2SNA. In addition to the club repeaters, the block house is home to one of the EastNet Flexnet Nodes. 3 Paccom TNCs: 145.010, 223.680 both at 1200 and one on 434.
Today, I visited the tower site for WA2SNA. In addition to the club repeaters, the block house is home to one of the EastNet Flexnet Nodes. 3 Paccom TNCs: 145.010, 223.680 both at 1200 and one on 434.
|
By
Chris Lance WW2BSA
·
|
|
KAM+ reset help request 4 messages
KAM+ v 8.0 firmware clean unit. Upper left and power light come on upon power up. Changed CR-2032 and did the J6 reset. COM port and cables AOK and working on my other two KPC-3 and 3+ units. Checked
KAM+ v 8.0 firmware clean unit. Upper left and power light come on upon power up. Changed CR-2032 and did the J6 reset. COM port and cables AOK and working on my other two KPC-3 and 3+ units. Checked
|
By
Ronny Julian K4RJJ
·
|
|
Is this device legal under current Part 97? 9 messages
I'm not a techy and may have misinterpreted things in my comments. At its lowest speed is this device legal for US? https://www.youtube.com/watch?v=104mm0lRsGs&t=2s https://www.aliexpress.us/item/3256
I'm not a techy and may have misinterpreted things in my comments. At its lowest speed is this device legal for US? https://www.youtube.com/watch?v=104mm0lRsGs&t=2s https://www.aliexpress.us/item/3256
|
By
Ronny Julian K4RJJ
·
|
|
Display name error
Hello all, I wish to apologize for a discrepancy in my display name. I discovered last night that it said K2EXE. My callsign has never been K2EXE, and I can't figure out how it was changed to that. I
Hello all, I wish to apologize for a discrepancy in my display name. I discovered last night that it said K2EXE. My callsign has never been K2EXE, and I can't figure out how it was changed to that. I
|
By
Tommy Brooks KG5ZSU
·
|