Hi gang, Here's the latest update on "our" project. I contacted Rail Master in New Zealand (John Agnew). He is building Sn3 exclusively and will not change scales due to tooling costs, etc. Why he

Jim, You might want to discuss the project with Bill Meredith - he created some brass etched kits for Sn3 & On3 of DSP&P Mason Bogies and Cooke 2-8-0s. He most likely would not be interested in

Hi all, I'm selling my last piece of HOn3 brass, an NCNG 2-8-0 #9 by Westside. It's painted a dull black with silver smokebox and red cab roof. Walschaerts valve gear. Open frame motor but runs well.

Hi gang, The attached message is from one of my kit customers. He's interested in joining the ET mailing list and, possibly, our society. Would someone please contact him at his email address and

I've added Tom to the list. He should start seeing messages immediately. Bob

OK, folks, time to do some preventive maintenance. In the past week, I've received the Happy99 worm and variants several times - it's time to try to kill the beast in our little circle(s).

Hi folks, I had heard from another 'e'list that Dave Hoffman is finally settled in enough to begin to provide the castings and kits he used to for the ET&WNC. I have a new address for him but

Hi all, Just a little note to let those interested in On3 ET kits that my 38' flat car will be ready to ship by the end of March. The pilot model is done except for decals made off an ALPS printer

Greetings: I recently joined this list, just to see what others are posting about the ET&WNC. I have little original material to add. However, I do have copies I made about four years ago at the

Tom, Interesting. The photo on p39 looked to me like a rather long car, so I assumed it was another of the 'built from a 36' flat' variety. It could be a 90 series though or one of the 'others'

Tom, It's nice to know that someone else managed to wade through the red tape of the National Archives. They had this information on the ET&WNC, but did not have the engineers field notes, which

Any one going to the convention that would like to share a room? I would like to go on friday thsi year but can not pay for two nights myself. I don't mind sharing with 2 or 3 other guys. I can sleep

Bill, I'm thinking about going, if you wouldn't mind a "Yankee" room-mate? Phread William C. Oram wrote:

Just checking to see if I'm back onlist. Sorry for the inconvenience.

Hi all, I just received pricing for the ET&WNC On3 38' flat car kit decals. Retail price is $7.50 per set, postpaid. They are printed by an ALPS printer on thin-film decal paper. If you've never

I have one guy wanting to share a room for the two nights of the convention. It would be better to have at least one more "roomie". Any takers? Thanks, Bill Oram Raleigh,NC

Folks, I told you if a virus came out, I would send a message to the effect that it is rail and what to watch for. As usual, the smug Mac users may delete this message now. The description below

By now you probably have heard of this virus in the news and from other lists. It has caused Microsoft & Intel some embarrassing problems - yet for some strange reason, I just can't get worked up

Volume 64, Number 1, 1999 of the National Railway Bulletin (the NRHS publication) has a photo of a Laurel Fork RR Shay. Author Fred Waskiewicz wrote a good article a few months ago in the same

Subject: AN ET&WNC RAMP Sent: 4/7/19 1:43 PM Received: 4/5/99 9:12 PM From: etwnc@... To: Chris Ford, cfordart@... Hey gang, got this in the e-mail