Re: ET&WNC conductor hat badge?


Brian Kopp
 

Lee I had some one-off brass parts photo-etched for an HOn3 bridge by a British company PPD Limited.
It was a thin 0.55mm sheet of brass about 600mm x 1200mm for $70 delivered. They go up to 4mm thickness I believe.

You could half etch the loose bits in the letters and leave them attached. That is how I designed the support attachments for the bridge parts.


https://www.ppdltd.com/services/model-rail

The downside is, you have to do the design work.....

--
Brian Kopp
Jacksonville, Florida

Join ETWNC@groups.io to automatically receive all group messages.