Hello Paul, I worked in the EU HF championship and I found a problem with the Cabrillo file. Unfortunately, I noticed it after the log death-line, so I'll probably be disqualified because of this issu

Hi, I have noticed a few things in EU HFC. One is that when you have "Show cursor in Entry line without focus" and use dual keyboards and you enter a callsign on keyboard 1 and press enter (ESM on) an

Hi all, any chance to have this contest supported? It runs next August 15,16. Just received notice by e-mail Here are the Rules: http://www.tiszacup.eu/index.php/en/contest-rules Bob, I2WIJ

DXlog locked in my shack computer while it continues to work in my laptop. Also it has locked in some of my club's computers (SZ1A). Also I have lost my settings as it seems to be the default right no

Hi all, just tested the QTC functionality and logged W3LPL on 3 bands and openend the QTC-window a few times and added a few QTC, finally only this 10 QTC-lines, but DXLog reports 18 rcvd QTC. Please

Hi all, tested the QTC functionality on another computer and was not able to record audio. Recording device is available and configured, but while start recording I got an exception (see attachment).

Hi all, my logging pc has the problem, that I have to reactive the recording device (Line-In) after every start with re-plugging the 1/4"-plug... Trying to start the recorder causes an exception and c

The Country (CTY) Files were updated on 04 August 2020: https://www.country-files.com/cty-3013-04-august-2020/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse

Hi Does anyone have a problem with F1 playing message SSB in SO2R Advanced ? I tried to use F1 meesage (CQ Contest) in EU HF in SO2R but there was a problem, no playing? In SO1R the F1 message plays.

Hi all, just made a test for the WAECW next weekend... What about some logic instead just fill the first 2 figures. If i type 3 figures at the time, the program should fill just the first from the QTC

Hi to all, I notice in last IARU HF that dual footswitch mode in SO2R doesn´t work anymore in the way like it was working before I used microHAM MK2R+ with 2 foot switch latest DX log contest IARU HF

Hi all, to save some milliseconds I normaly press '+' after hearing the exchange and while transmitting I type the exchange and press 'Enter'. In WinTest the cursor will be moved to the exchange field

Hi all, I operated CW only in the EUHF yesterday, using 'advanced SO2R' just to work some mults on the other band. If I worked 2 QSO's on the other band without QSO on the running band the band change

Hi everyone. I tried the new release 4.2.28 and I found that now the K3 driver works perfectly in SO2V and SO2R mode. The only problem remains with the Winkey using the Rigexpert TI-5000. Instead, usi

DXLog 2.4.28 is now available from the DXLog.net website. The checksum from CertUtil -hashfile is 21fc63cfe8053ece48e8bb99309b386bec5343e0 There are new CAT drivers for the FT-817, FT-818, FT-847, FT-

It's well into the contest but for those interested, there is a further updated prefill database for the IOTA contest available here http://dxlog.net/sw/files/download/database/IOTA_db.txt For new use

Hello Björn, Could you check the following scenario: S/P mode, Number server Jump to a spot. Very often you have to fine tune the frequency. Sometimes the offset is more than the "Spots bandwidth" set

Hello Björn, Here is another minor issue. S/P, Number server When Tools>Data entry>Spacebar reserves serial number is checked, grabbing a spot by pressing Ctrl-Space also reserves a serial number. 73'

During the IOTA contest I ran with the data entry window at the maximum font size. At this size, mults are clipped. Seems OK at other sizes.

Data coming from the DX Cluster is losing the first character. It is getting fixed when I correct and log the contact though.