|
QSL Date Format 5 messages
Good morning Dave, I just would like to ask whether it is possible to change the QSL Date Format to be printed on cards to dd-mmm-yyyy (4 digit year), of course English month abbreviation. So far this
Good morning Dave, I just would like to ask whether it is possible to change the QSL Date Format to be printed on cards to dd-mmm-yyyy (4 digit year), of course English month abbreviation. So far this
|
By Gerhard "Gary" Jaeger, DF2RG
·
|
|
Cass Award message
Please delete the Cass Award message I inadvertently copied to this group. Since the 2020 winners are the leaders in their categories, there's no real element of surprise, but I'd still appreciation y
Please delete the Cass Award message I inadvertently copied to this group. Since the 2020 winners are the leaders in their categories, there's no real element of surprise, but I'd still appreciation y
|
By Dave AA6YQ
·
|
|
Exporting from DX4WIN to DXLab 9 messages
Hello Friends, I've been getting my feet wet with DXLab over the last few months and got everything installed and working well now. I have not yet moved my log, but i believe I'm ready for the final s
Hello Friends, I've been getting my feet wet with DXLab over the last few months and got everything installed and working well now. I have not yet moved my log, but i believe I'm ready for the final s
|
By Saad Mahaini
·
|
|
NEED HELP IN GETTING COMMANDER WORKING 13 messages
I have been fighting this for a few days. I can load DX/lab Launcher but I only get Commander. When I try to load the remaining programs, the only choice I have is "Update" which can't be done because
I have been fighting this for a few days. I can load DX/lab Launcher but I only get Commander. When I try to load the remaining programs, the only choice I have is "Update" which can't be done because
|
By Dan Coleman
·
|
|
VERY slow start up 10 messages
Hello to the group I'm a new group member and user of Dx Lab software. I have just installed Launcher , Commander and Keeper. Problem... when I click the shortcut to start Launcher it produces the nor
Hello to the group I'm a new group member and user of Dx Lab software. I have just installed Launcher , Commander and Keeper. Problem... when I click the shortcut to start Launcher it produces the nor
|
By
f5vjc
·
|
|
Indicates wrong mode only on CW FTDX3000 4 messages
Commander tracks frequency and mode, expect that it shows 'CW' when the rig shows 'CW USB' on 40 meters. Similar results on other bands. Reversing the mode on the rig shows 'CW-R' when the rig shows '
Commander tracks frequency and mode, expect that it shows 'CW' when the rig shows 'CW USB' on 40 meters. Similar results on other bands. Reversing the mode on the rig shows 'CW-R' when the rig shows '
|
By Steve
·
|
|
Avery 8161 Settings 2 messages
What are the settings for the Avery 8161 ? -- 73's de NU4N Dave
What are the settings for the Avery 8161 ? -- 73's de NU4N Dave
|
By Dave Tucker Nu4N
·
|
|
DXLab Commander connection to HF-AUTO SW 14 messages
Terry Glagowski / W1TR developed an application called *HFAUTO SW* to control the Palstar HF-AUTO *ATU*. I installed it and connected to to DXLab Commander via the [Net Serv] configuration. Data is se
Terry Glagowski / W1TR developed an application called *HFAUTO SW* to control the Palstar HF-AUTO *ATU*. I installed it and connected to to DXLab Commander via the [Net Serv] configuration. Data is se
|
By Norm - KC1BMD
·
|
|
DX Marathon Progress report 4 messages
I believed I may have messed up my registration entries when trying to switch between two logs. I hope I have that straightened out. However, now when I run the Marathon report for 2021 I do not get a
I believed I may have messed up my registration entries when trying to switch between two logs. I hope I have that straightened out. However, now when I run the Marathon report for 2021 I do not get a
|
By Mike KC7V
·
|
|
Weird radio behavior with WSJT-X 14 messages
When using WSJT-X with my K3S I occasionally see very bizarre behaviors. Occasionally the radio remains in TX and can only be shut down by powering off the radio. Once in a while the radio goes into T
When using WSJT-X with my K3S I occasionally see very bizarre behaviors. Occasionally the radio remains in TX and can only be shut down by powering off the radio. Once in a while the radio goes into T
|
By Rick
·
|
|
Uploading to LOTW 2 messages
I have LOTW linked up and I see R on my QSO from the stations I worked.Do I have to set all the LOTW stations before I up load them to LOTW? Rich
I have LOTW linked up and I see R on my QSO from the stations I worked.Do I have to set all the LOTW stations before I up load them to LOTW? Rich
|
By Rich KB1FGC
·
|
|
Help on state column
+ AA6YQ comments below I went into ADV tab and tried filtering QSO's for a state. + An SQL filter for a particular state - say Florida - would look like this: (DXCCPREFIX='K') and (STATE = 'FL') So I
+ AA6YQ comments below I went into ADV tab and tried filtering QSO's for a state. + An SQL filter for a particular state - say Florida - would look like this: (DXCCPREFIX='K') and (STATE = 'FL') So I
|
By Dave AA6YQ
·
|
|
Spot Collector Email Alarm ? 5 messages
When entering an SQL expression in the Email Alarm Trigger panel are parenthesis required around the call signs entered? For example: callsign =( 'KH9', 'C91BVA', ZF2BJ'. 'PJ7AA', 'ly11ly') Also are t
When entering an SQL expression in the Email Alarm Trigger panel are parenthesis required around the call signs entered? For example: callsign =( 'KH9', 'C91BVA', ZF2BJ'. 'PJ7AA', 'ly11ly') Also are t
|
By w2eck
·
|
|
QSL question 8 messages
Hi,I a, new into the digtial logger,About 5 weeks now.On my paper log I used to star a station and that told me to send a QSL.I see there are provisions for sending and receiving but is there somethin
Hi,I a, new into the digtial logger,About 5 weeks now.On my paper log I used to star a station and that told me to send a QSL.I see there are provisions for sending and receiving but is there somethin
|
By Rich KB1FGC
·
|
|
Error in VA State 3 messages
Hello, In DxKeeper (v1599) I cannot find Alexandria City at the state VA. The call is K1FR and according to QRZ.com information and the photo of the qsl card, Jesse lives in Alexandria City. Is this a
Hello, In DxKeeper (v1599) I cannot find Alexandria City at the state VA. The call is K1FR and according to QRZ.com information and the photo of the qsl card, Jesse lives in Alexandria City. Is this a
|
By Patrick ON6AT
·
|
|
CQ 160 SSB contest submit problem 2 messages
Hi, Basic user here and setup for contest and went ok as logged thru the capture window and could log and change exchanges as necessary. Went to print the Cabrillo report and it did not include the st
Hi, Basic user here and setup for contest and went ok as logged thru the capture window and could log and change exchanges as necessary. Went to print the Cabrillo report and it did not include the st
|
By Phil W9IXX
·
|
|
Controlling sequence from another sequence? 5 messages
I know a sequence can include a command to control a slider (and I do that). Is it possible for a sequence to include a command to control another sequence? For example: You have a bank for four butto
I know a sequence can include a command to control a slider (and I do that). Is it possible for a sequence to include a command to control another sequence? For example: You have a bank for four butto
|
By Norm - KC1BMD
·
|
|
QSL printing size problem 5 messages
Recommended size for QSL cards is 90*140 mm. My cards are this size. This size is not in the menu, neither in DXkeeper printer module nor in the printer's menu. The solution is to make a custom define
Recommended size for QSL cards is 90*140 mm. My cards are this size. This size is not in the menu, neither in DXkeeper printer module nor in the printer's menu. The solution is to make a custom define
|
By Knut Meland
·
|
|
Lat & Long 4 messages
Hi Dave... Just set up DXLab Suite on a new laptop... all went well but an issue with Lat/long in DX View and Prop View. My QTHID Lat/Long is correct for my home QTH. [45 31' 14" N 76 37' 30" W] in DX
Hi Dave... Just set up DXLab Suite on a new laptop... all went well but an issue with Lat/long in DX View and Prop View. My QTHID Lat/Long is correct for my home QTH. [45 31' 14" N 76 37' 30" W] in DX
|
By Curt Bowles
·
|
|
waiting for TQSL to complete processing 2 messages
Is it possible to make the DXKeeper LOTW automatic upload window smaller, not display or have it where is is not always on top of other windows thanks 73 de jim ps: this is a question not a request hi
Is it possible to make the DXKeeper LOTW automatic upload window smaller, not display or have it where is is not always on top of other windows thanks 73 de jim ps: this is a question not a request hi
|
By jim
·
|