MySC Spot Sources (2) have always timed out and disconnected sometime during the night and that's understandable. Now they time out and disconnect at random times during the day. Yesterday it was at 5

Today when I started up my DXlab suite, spot collector starts and asks for my call. I entered it then spot collector starts but I lost all my settings – my SQL settings didn’t load, my spot sources di

If you are using Window Defender Antivirus (Windows 10), update it to its latest malware definition in <https://www.microsoft.com/en-us/wdsi/definitions> before installing or upgrading to DXKeeper 15.

I worked the VHF contest over the weekend and noticed that I have several contacts that got logged into the native WXJT-x logging facility that did not get picked up in the DXKeeper log. I now want to

I have Commander configured to control the IC7300 via the USB CAT serial port. If I close Commander I can configure WinWarbler to use the USB CAT serial port for CW and RTTY. Either one of those confi

Please find attached debugging/error log in case it'll help determine why WSJTX and DX are giving rig errors. + The errorlog you sent me contains no reports of errors; it was created because you enabl

Will Commander communicate with the new Yaesu FTDX 10 now or in the future? Thanks, John KF0CGG

I've run into an issue (as well as a friend of mine at his station) where when manually entering a date time into DXKeeper where when saving I got a message window saying "the QSO cannot be saved beca

WSJT-s used to send both transmit and receive frequency to DX Keeper when integrated through Spot Collector. I must have turned something off as it now only logs TX frequency no RX. Can someone help?

While looking at dxkeeper in prep for wfd. I did not find a drop down choice for wfd . I did see fd option. But The rules are different DEC for YORK & DURHAM Region ARES. ASEC GTA ARES section M: +1-4

Transfering over 600 Q's from N1MM to DXLab via the ADI file produced records with 1000W versus 100W. I have yet to determine if N1MM created the problem (sure looks like it) but I now have to change

I have recently upgraded to DXLabs and have imported my log file from Log-EQF. WHAT A WONDERFUL CHANGE, EQF served me well for years! Some items were missing or wrong and I need to change before uploa

Hi, I would like to auto start an application that needs a command line command, but don't see how to make that work. Do I need to put it in a batch file and start that? The command: "C:\HamPrograms\H

I just installed DXLauncher and DXKeeper on my PC (Intel i7-8665U CPU @ 1.90GHz 2.11 GHz; 16GB RAM; 1TB HD). It takes 1 minute 10 seconds to load DXL first and then 1 minute 35 seconds to load DXK. Al

I had a way I could see only spots from "NA-E" but somehow it disappeared. It seems like I remember somewhere I could select "NA-E=Y" but I can not find anything about it. Suggestions? Thanks Bill W5E

N1MM-DXKeeper Gateway version 1.2.1, which corrects a previous defect when operating from a geographic locale that doesn't use period as a decimal separator, is now available via https://www.dxlabsuit

Hi Dave,, I took this to the WSJT-X reflector but they said that they didn’t think it was their problem and that I should take it to DXL. 10 I run DXK and WSJT-X together.WSJT-X TX Enable tops for no

My Yaesu FT 707 transceiver is not listed for use with DXLab. Can I use this rig with the software? It's actually a mobile rig but works quite nicely in the shack.

I've been migrating my shack computer to a refurb Win 10 machine, slowly getting everything going again. I have WSJT-X integrated to DXLabs per the directions, first by turning off Commander and setti

Good morning folks; I hope all is well with you out there! [Cross-posted to CTDXCC and DXLab groups] I have decided to embark on a bit more award chasing and I have run into a few questions... I would