Hi,I a, new into the digtial logger,About 5 weeks now.On my paper log I used to star a station and that told me to send a QSL.I see there are provisions for sending and receiving but is there somethin

When entering an SQL expression in the Email Alarm Trigger panel are parenthesis required around the call signs entered? For example: callsign =( 'KH9', 'C91BVA', ZF2BJ'. 'PJ7AA', 'ly11ly') Also are t

Hello, In DxKeeper (v1599) I cannot find Alexandria City at the state VA. The call is K1FR and according to QRZ.com information and the photo of the qsl card, Jesse lives in Alexandria City. Is this a

Hi, Basic user here and setup for contest and went ok as logged thru the capture window and could log and change exchanges as necessary. Went to print the Cabrillo report and it did not include the st

I know a sequence can include a command to control a slider (and I do that). Is it possible for a sequence to include a command to control another sequence? For example: You have a bank for four butto

Recommended size for QSL cards is 90*140 mm. My cards are this size. This size is not in the menu, neither in DXkeeper printer module nor in the printer's menu. The solution is to make a custom define

Hi Dave... Just set up DXLab Suite on a new laptop... all went well but an issue with Lat/long in DX View and Prop View. My QTHID Lat/Long is correct for my home QTH. [45 31' 14" N 76 37' 30" W] in DX

Is it possible to make the DXKeeper LOTW automatic upload window smaller, not display or have it where is is not always on top of other windows thanks 73 de jim ps: this is a question not a request hi

Hi, is support for ID-5100 planned ? It already almost works using othe rmodels.

-------- Doorgestuurd bericht -------- Onderwerp: ADIf export Datum: Mon, 4 Jan 2021 17:42:29 +0100 Van: Eddy_on5jk <eddy_on5jk@...> Aan: DXLab-forum <DXLab@groups.io> Best wishes again Dave. For so m

Persistent problem for a number of months. QSO batches numbering in the hundreds after a contest and uploaded to eQSL will randomly halt. When this happens, DXKeeper hangs indefinitely and the process

When trying to launch Commander (Via DXLab Launcher), I get the following error: "Component 'MouseWheelControl.ocx' or one of its dependencies not correctly registered: a file is missing or invalid" I

Howdy group On every startup Commander is twice displaying an error window saying the comport for my xcvr is invalid. Device manager shows the comport, an Edgeport-4 four port device, all 4 ports are

There have been several recent problem reports here of the form "DXLab application function X stopped working Y weeks/months ago". If you try a DXLab application function that you've never before util

My log was imported from an ADIF file generated from HRD Logbook after I installed DXKeeper. I had already uploaded the QSO's to LoTW and eQSL using HRD Logbook. I would like to get the confirmed stat

Hey folks. Been using DXLab for years, and finally hit an issues I could resolve. Looking for Devine guidance: Problem: When running LotW QSO or QSL sync, get: "DXKeeper online QSO or QSL) sync (not r

Hi. I am having some trouble with the subject. I am trying out producing some 'old fashioned' QSL cards with labels and I guess I expected the software to download the addresses of the QSOs I made to

Terry Glagowski / W1TR developed an application called *HFAUTO SW* to control the Palstar HF-AUTO *ATU*. I installed it and connected to to DXLab Commander via the [Net Serv] configuration. Data is se

Hello, I have run thru the description http://www.dxlabsuite.com/dxlabwiki/GettingStartedwithK1JTModesWithJTAlert serval times and set all the switches asked for. But I still do not get a correct indi

I have extended Yaesu FTDX-10 support in the next version of Commander to provide the ability to specify a default width and a default shift for each of 7 modes, with the option to automatically set t