Is it possible to add 8M in SC-Band selection? 73, Aart PA3C

* If you are using Window Defender Antivirus (Windows 10), update it to its latest malware definition in https://www.microsoft.com/en-us/wdsi/definitions before installing or upgrading to DXKeeper 16.

Dave, I took part in the Michigan QSO Party this last Saturday. I live in Michigan but, thinking my W5DT call sign might confuse people, especially those out of state, I used W5DT/8 for the period of

Hello everyone, I have been using DXLab for many years. A wonderful resource for the community. Just replaced the old rig (Yaesu FT-920) with a TenTec Orion 565. Commander worked fine with the 920 but

I notice that CW speed in the Mode panel is stuck on @31 wpm the last N1MM+ speed I had set. I am not using N1MM+ now but using a paddle connected to a WinKeyerUSB connected to the rig and the CW spee

Dave, I created a user defined field for NPOTA (Parks on the Air). I had a QSO with a guy who gave me 2 park #s at the same time within the same QSO. I entered them separating them with a semi-colon.

Awhile back I inquired about a problem with internet comms between DXKeeper and LotW. I was getting the error: DXKeeper Online QSL Synchronization (Not Responding) – same for sync QSOs as well as Sync

If you are using Window Defender Antivirus (Windows 10), update it to its latest malware definition in https://www.microsoft.com/en-us/wdsi/definitions before installing or upgrading to Commander 15.0

1. A QSO partner tells me that he takes QSL via buro to his manager. I use Capture in DXKeeper and cannot find a field to put this info. Am I missing something in the DXKeeper functionality? 2. I real

Hi: I am running the latest DXKeeper, v16.0.7. I added a new column today for ANT_AZ in my log display. I am hoping to record/display the bearing to the other station in my log. I next went to the DXK

I noticed during a recent update that all the slider controls on Commander 15.0.9 are missing. By that I mean there is a blank white space where the left and right arrows and slide bar should be. The

When I operate portable, I would like to see spots from SpotCollector running on my home station; easy to see in my browser: http/w5sv.ddns,net:8080/spots I can't seem to configure spot collector on m

...via the Databases tab on DXView's Configuration window. 73, Dave, AA6YQ

ADIF 3.1.2 was approved yesterday. It defines the 67 new sub-modes listed below, most of them supported by FLDigi. In ADIF, modes and submodes are unique. DXKeeper exploits this by treating submodes a

GD, How does one abort subject command? I had never run it before and have over 100,000 QSO's in my log. ============= 73, Chuck N7BV

Before I rebuilt my computer and had to do a fresh install with DXKeeper when I save a qso it use to be able to populate name, address etc automatically without have to push the "CBA" button. I think

I really like the DXLab Suite and use it daily. Is there a place to make a donation to help keep this project going? thanks & 73, Mike / Wf0M

So, I've recently restored my antenna farm, after a tropical storm last year and some other subsequent "fun". While I was off the air, I also upgraded to a new computer in the shack...and I've finally

I have DXLabs on my main shack PC. I plan to load it on my laptop and put the database on my cloud server so that I am able to use it at my second station (cabin). Is there a way to keep the layouts c

Hi Dean, Yes, no, and yes. 73 Bill G4WJS. -- 73 Bill G4WJS.