Is it possible to activate the "Tune" function of the Icom IC-706 using one of the user defined buttons in Commander?

I occasionally need to modify a few qsos that I have uploaded to LOTW incorrectly. What is the correct procedure to do this upload? In the past I have received a screen telling me that “.adi file alre

If I am running cw skimmer prior to starting DXLab software, DXLab becomes extremely slow to startup….I am talking minutes…. Tim wa5yom

+ AA6YQ comments below I have a Node red flow connected to Commander Netserv UDP12061, however after some time the connection fails with an invalid udp address/port popup at Commander. Click ok and re

When I double click on an SC spot Commander frequency changes but the Icom 7300 rig frequency doesn’t change. If I then change the rig frequency Commander stays on the SC frequency and doesn’t follow

Bring up the programs, Spotcollector comes up, displays old spots. The cluster feeds connect and get green lights, I can look at the clusters and they are sending spots - but nothing shows up on Spotc

If i double click on a spot in SC should the gateway to WSJT cause WSJT to follow to the spotted band? 73 jim ab3cv

This one is for users...not Dave....does anyone know where I can find a library of SQL expressions that will prove useful in searching various things within DX Keeper? Tks, Mark

I was on 10m FT8 and worked a VP2 station. He used LoTW. I did not have either Digi or FT8 confirmed in DXView. Later I did the "Sync LoTW QSLs". The DXKeeper report said 2 QSLs processed and "NO new

Hello I just installed DX Lab on a new PC and am trying to test the audio alarm so to set the volume level but there is no audio at all. I tried ticking the audio box on the main window to no avail. O

Hi all. For a while now, when doing a "Sync LoTW QSOs" in DXKeeper's QSL tab, the report never goes below "13 QSOs processed, 13 log entries updated". Sometimes, for example after I've done an upload,

I just set up DXK and SC for logging from WSJTX. I have done this for several years without issues but today was configuring a new rig and related software (Slicemaster6000 and SmartSDR) . All is work

!!!False Alarm!!! I manually uninstalled TQSL, rebooted and installed 2.6.1 again and the popup has ceased. Sorry. Started getting a popup this morning "DXKeeper Updates from LoTW A new TQSL release [

Need help fixing this error notice, which occurred while attempting to update DXVIEW. Please. And thank you. DXView was running fine at the time. DXVIEW ERROR: "cannot delete old C:\DXLab\DXView/Scomm

I have a question best described with a pair of pictures. I have a pair of radios defined set up as SO2R with OTRSP protocol to control an SO2R audio and CW/PTT controller (YCCC SO2R Box). I have been

Using "Configuring DXKeeper for Interaction with LOTW" dated 2/18/2020. I then tried as a test to upload one Qso to LOTW, a window pops up saying "No QSos were uploaded, Command Syntax error. I questi

Hello again, In SpotCollector, SPProb and related boxes are empty even though PropView is running and changes when different callsigns are clicked. Sorry if I missed a checkbox. Many thanks for the gr

Sorry I hit the wrong button before I finished this email! Dave, I have been having a slow start problem with the DxLauncher window for many months now and so far all my attempts to solve the problem

I'm trying a new mode VarAC. The mode logs with the mode set to "VARA" . I add an exception to TQSL so it uploads to LOTW as DATA. So far it all is good. When I update from LOTW I get an error "No mat

Hi everyone, I am trying to print MRC's and cant seem to figure it out Looked at a couple of things on the web , and didnt see anything on what to push to get there. If anyone knows how to do it step