OK, I finally decided to get systematic about learning how to use Spot Collector effectively, and right off the bat I'm hung up. The Help file starts off with discussion of the Pre-Filtering Window, b

This is weird. Been using Commander with my TS-890S for a couple of years and never observed this behavior. I double clicked on 9X5RU in Spot Collector. He is operating split on 20 meters, and Command

When clicking on a spot highlighted in red my capture window does not accept the call. Even when changing bands. It seems to only happen with the call A61BR. The radio changes frequencies. Not sure wh

+ AA6YQ comments below With 2.2.5 for launching what I use plus WSJT-x and JTA it works fine. However terminating is not good. I get two different Launcher popups 11 times. "No main window is specifie

If you are using Window Defender Antivirus (Windows 10), update it to its latest malware definition in <https://www.microsoft.com/en-us/wdsi/definitions> before installing or upgrading to DXLab Launch

I tried to update Launcher and all the members of the Suite changed, adding numbers to the end prior to the .exe I saved my MDB log file and tried to start anew with LabLauncher 197 from the website.

Should it matter whether the radio is powered on before or after Commander is launched? I have a Lab599 TX-500 that uses a subset of the TS-2000 command set which sometimes will not connect (using 960

Dave, I got Commander connected to the radio with an off-the-shelp US

I note that the Rwanda dxpedition FT8 QSOs I log initially show up in JTAlert (or on WSJTX) as from grid KI58, but when they are logged in DXKeeper they are changed to KI47ts, which is what QRZ shows

Georges Ringotte <f6dfz@...> added folder /Command Sequences and Sliders/Yaesu/FTDX-101/Sequences/FTDX101MP CW Split F6DFZ

If I try this on the bottom of the main log page, I get all the W1AW entries. w1aw/* by Pressing the Call button. But if I try either of these via the ADV Button as SQL's. (CALL='W1AW/*') (CALL='W1AW/

Hello, I configured SpotCollector (9.4.0) for two spot sources: db0soe.de (dxspider v1.55) via telnet and CQDX via IRC (us.worldirc.org). CQDX obviously shows truncated callsigns with a maximum length

I have been running an Icom IC-746Pro which went belly-up earlier today. So I ordered a Yaesu FT-710AESS from HRO a couple of hours ago. I have been a DXLab Suite user for almost 20 years with over 6K

I am a member of a makerspace with a Ham shack. The computer connected to the radio has a login for each ham who has been trained on the procedures of the shack. Very few of these users have administr

I ran into a TO1Q call that DXLab doesn't accept. It is a special event station operating out of Guadeloupe. How do I log this? 73 Jeff kb2m

It costs nothing for anyone -- ARRL Member or not -- to submit QSOs to LoTW, and monitor their confirmation via LoTW. Some DXers are perfectly content with tracking their progress in this manner. It c

If you are using Window Defender Antivirus (Windows 10), update it to its latest malware definition in <https://www.microsoft.com/en-us/wdsi/definitions> before installing or upgrading to DXLab Launch

I have a new FTDX10 that after some fiddling with parameters, has been running on DxLab. However, since installing DxLab, the Yaesu screen periodically freezes and requires a hard reboot to bring it b

I just switch internet providers and having an issue with the new router. When I first set my phone and dxlab computer on the same network it works fine but only for a short time, then I have to reboo

Hello, DXLabs controls my Yaesu FT-950. My Signalink-USB went belly-up and so, as a replacement, I bought a comparatively new product "Digirig". My problem is that, for my FT-950, Digirig uses RS-232