Yes, I am using Primary Callbook - QRZ.COM, Secondary Callbook - HamQTH. 73.

DXK 16.0.7 will not sync LOTW QSL or QSO today. Error: "Unable to download from LOTW". I tried loading an earlier version to registry but DXK still displayed 16.0.7. There are 46009 QSO's in my log. I

Planning for a home brew relay box to route the rig to diffetent ant depends on band. Can the software send 5 Volts on off signal via a hardware box? Of course, it can be manual control if above not p

Hello Dave. I was overjoyed early and said that I had found a mistake in the wrong port number. In reality, the situation is as follows. Using: 1. N1MM + DXKeeper + Gateway. DXKeeper: "Config" panel -

Any one using commander control for a Yeasu ft857 xcvr. I have tried using straight thru and cross over adapter just in case. I am using a CT62 cable I got on EBay(ugh!). Any help. Thanks es 73 Joe K2

This is probably best answered by Dave or another dev team member. I'm one of the N1MM developers. I'm making some changes to the ADIF export per a request from the ARRLs LoTW team. For rovers - this

Please advise how to setup multiple rigs synced for diversity receiption on different ant to reduce fading. Rigs are icom, sdruno (emulate ts480), sdr console (emulate ts2000) Can "manual master" tuni

Getting messages from MS about updating WIN 10 to V20H2. Has anyone done so and were their any subsequent problems with DXLab apps? Thanks - Alan K9MBQ

After further experimentation, I found that now, DX ATAS is now opening twice when I run DX Launcher. The first DX Atlas map that loads does show QSO’s when I click “Plot” in DX Keeper, but the second

Recently I found that when I click “Plot” on DX Keeper it does not plot my QSO’s on DX Atlas. After experimenting with various settings without success, I uninstalled and reinstalled DX Atlas. DX Labs

Received an error today after completing an FT8 QSO, the results was indeed a QSO not being logged in DXKeeper. There is an entry in the errorlog,txt file. DXK also displayed a pop-up window with Rece

I have just installed SpotCollector, version 8.8.3 from the DXLabLauncher program. I am running Windows 10 Pro on a laptop. My problem is that I do not see any spots at all in the main window. All I s

Dave, Thank you for your input on the file structure when installing the DXLab modules. What I did to get them installed was when the “defaulted” path to where the modules were to be installed came up

Try as I may, I can't get SatPC32 to talk to Commander ... see screenshot. I re-started both Commander then SatPC32 ... no error ... just that Pressing "Connect" has no effect. I searched for an addre

My active log (DXKeeper) was on a LAPTOP that recently crashed. I was backing up to another laptop but the backup file is not current. I there a way to import a log from QRZ.com into DXKeeper. I reall

I have been using ClubLog to confirm QSL's received via bureau. I am able to save an ADIF file of the cards I confirmed from ClubLog. Is there a way to update DXKeeper with the adif file from ClubLog

DXK worked yesterday 3-14-2021 (a bit slow). Today 3-15-2021 "unable to launch after 180 seconds). I have not tried anything to to "fix" the situation. All other DXLabs components launch fine. Bill, N

Hello to the group again. New to DXlabs, I've been learning about DXkeeper most of the day from my Elmer, who has a lot of experience with the programs. When operating ft8, I use WSJT-x - the Radio ta

When trying to install the DXLab suite of software on one of my computers, I encountered an install abort message on some of the modules during the process. I was able to install "Launcher","Commander

Under LotW Cfm there are asterisks next to some of the Y entries. What does that mean? I can’t find a reference in the documentation. Bob AF9W