Hi,I tried the suggestions before about searching skcc numbers with a T,C,S at the end.It doesn't seem to work right. here was the syntax. APP_DXKeeper_USER_DEFINED_0 like '*[STC]' (APP_DXKeeper_USER_

Hello, I have tried to set up the radio with SATPC32 according to https://www.dxlabsuite.com/dxlabwiki/SatelliteTracking This does work fine, it is ok to set the transceiver via this interface. But I

I have been running DXL Commander, CW Skimmer and Nap3 simultaneously using a third party virtual port facility like LPBridge or Win4K3. Each of those facilities are CPU consumers. Commander has the f

This suggestion is for when log display is not filtered: When I sort my log in descending order, the QSO # shown above the log display is #1. It is my last QSO so, in my mind, it makes more sense for

I'm sure I've seen this topic before but didn't see a resolution to the question in the replies... Using AFSK set to LSB with a 7300 and would like to click on the bandwidth or spot collector and have

Hi , Would itbe possible to ask for a feature request in COMMANDER? What I'd like to see is the memories remembering which antenna to switch to. (Mine is an Icom IC-756 Pro 3), This would be handy for

hI ALL,Dave HELPED ME WITH A COMMAND in the advanced TAB and of course my logic is not computer logic-lol. I Couldn't figure another step. I am trying to have the filter tab search only SKCC numbers w

Hi,I managed to export my files into the SKCC logger but the SKCC number didn't export.I have the SKCC number in the comment column.Perhaps that's why?Were would I put the number so that the SKCC logg

Several times in the past week, when starting the DXLab suite (all modules except WinWarbler) a SpotCollector dialog box pops up asking that I enter my callsign. I do so and then find that the Spot So

Other have reported difficulties when trying to use Commander with JTDX. It appears that the CAT interface on JTDX is intolerant to any serial port collisions. I've tried a number methods for multiple

David G3YYD recently posted the following message on the RTTY discussion group. My comments are preceded by + below. ---- I have issued an update to 2Tone for Windows 8 and later, which can be downloa

I'm sure I have a setting wrongly set. I was participating in the AM Rally today and when sending spots to the cluster via CQDX they would report on the cluster as SSB when it was actually AM. DXKeepe

For the life of me I can’t get the SQL to work properly with Tag Like ‘FOC’. I can’t find a useful referend in the documentation. I have my special call sign list all set but no joy with the SQL. Help

I recently installed DXLab on a second computer. I imported my log without difficulty from the primary DXLab computer. I selected colors for DXK and the Spot Collector to match the display in my prima

Hello, I have started using QO-100 and thought it might be a good idea to use the transverter-function within DXKeeper. But there is no transverter for 13 cm and 3 cm availible. Is there any way to ad

I thought I would operate a little rtty using Win Warbler this afternoon. There is a way to get Spot Collector to display a band dial display of the spots, like a radio dial of spots of one band..simi

I operated from QTH "A" from about 2015 to near the end of 2019. I then moved to QTH "B" across state lines and have been operating from there with the same call sign since then. Can I export all my l

When I started DxLab Launcher this morning, I got a Script Error in Pathfinder. An error has occurred in the script on this page. Line: 1582 Char: 34 Error: Expected ";" Code: 0 URL: http://www.qrz.co

This is a iCOM command-generating slider from the Files section for RF Power control: <LowerBound>0 <UpperBound>255 <SmallStep>1 <BigStep>16 <Caption>RF Pwr <value 100> w <Function>Adjust RF Power <Co

I recently noted a few QSO as "broke" after downloading LOTW confirmations. The inconsistency has been for stations obviously working from a location different than their QRZ.com entry states. I have