Dear Dave, I participated actively in the WPX SSB contest on 40 Mts and I noted the following: When I click on a callsign in the waterfall spectrum, the radio will move to the desired frequency but if

I just wondered why my ham station computer (with 12 negs of RAM) is running so slow. I opened TASK MANAGER and see that without Spot Collector running, CPU usage is about 5 % (with a lot of other stu

Dave - I wonder if you have any VB code examples of communications with the IC-7610 that you can share? I found an old link to some examples at your site for other communications, but it was a dead li

hi all & dave , it used to work. now I get this error screen ideas ??/ tnx bill This email has been checked for viruses by Avast antivirus software. www.avast.com

Hello Once i start Spot Collector, seems like everything slows down considerable and response time on other modules i.e. logging, etc. become noticeably sluggish, unresponsive in some cases The worst

Recently I started having issues with the importation of ADIF files. In this example I import my wsjtx adif file using IMPORT QSOS tab>standard ADIF. When I run this operation duplicates are now added

+ AA6YQ comments below I see in the release notes they've adopted ADIF recommendation of mode: MFSK submode:Q65. Does this mean it's now in the ADIF spec and ready for adoption by loggers like DXlabs?

Hello all…I have just started to notice for a week now that when I try to upgrade the LOTW and eQSL AG databases, nothing happens. My cursor has a swirling circle on it but nothing happens. If I perfo

I just installed launcher on a new laptop running Windows 10 pro. I installed into the default location: C:\DXLab. When downloading, I selected the "click here for installation on Windows Vista, 7, 8

I have a Flex 6700. Sometimes.....when I have more than two Panadapters open, for example, 3.525 and 7.025, If I click on Panadapter B to move frequency, and couple of seconds later it shifts Panadapt

Suddenly on it's own the spots are not showing at all. I am connected to the cluster but the collector is not showing spots. It's the strangest deal

While reading up on Clublog Uploads I seen there is a status item that can be Y, N and M. I understand Y and M but don't get the notion of N. What would cause N to be set? Thanks Jim ab3cv

I've found that chasing POTA's to be a lot of fun. I've created a POTA SQL filter on SpotCollector based on notes in the spots, but I've found that the spots captured in this manner is a small fractio

Is it possible to have - when I log a QSO - that in DxKeeper pane Log_QSOs>QSO>Power is reported the actual RF (Power) appearing in Commander when RF is enabled in "Xmit Meter" **instead** of the powe

I see in the release notes they've adopted ADIF recommendation of mode: MFSK, submode:Q65. Does this mean it's now in the ADIF spec and ready for adoption by loggers like DXlabs? 73 jim ab3cv

I am running an Elecraft K3 and a KPA1500 amplifier. I use the DXLab Suite of programs for logging, rig control and so on. If I do a manual band change on either the K3 or using the KPA1500 and change

Hello I have an issue with DXkeeper on Win 10 doing anything that involves downloading from LOTW such as Sync QSL’s or sync QSO’s. When I hit the relevant button the box will come up, says that user a

When I select a station to work using JTAlert/WSJT if the call has been worked previously on any band or mode the contact appears in DXKeeper and the call and info appears in DXView. If I have not wor

Hi Dave, any information on what is happening on ClubLog.org? It appears like the site is down. 73 de Duncan, KF6ILA

Glad you found it. Glad I am not the only one that cannot see the filter text om the filter buttons in both DXKeeper and SC. I really would appreciate it if those buttons could be made larger or confi