Hello, I try to run my ICOM IC-9700 with a DXLab <-> SatPC32 <-> WSJT setup. Therefor I have configured: 1) IC-9700 to SatPC32 via COM-port 2) DXLab Commander connected to SatPC32 using Commander Radi

Hi Dave, Noticed a slight glitch in DXView while working the CW Contest. Luxembourg SP (LX2LX) initially comes up as expected at 50 degs but then immediately jumps to 180 deg. This is the only Europea

The IC-7600 has a CI-V command to switch RIT on and off, which is easily implemented with a button sequence. The commands for that are: FEFE<CIV>E0210100FD -> OFF FEFE<CIV>E0210101FD -> ON Is it possi

Two iCOM radios I use with Commander have sequences that control several functions. Two of these cycle through the choices for "Preamp" and "Attenuation" and they work fine, until I change bands. Thes

I’m not a contester, but I do make some contest contacts while hunting for needed prefixes. I feel obliged to send in a checklog to help those stations I work. I have a question concerning how one rep

I have two radios configured in Commander. I think it remembers the last one used when Commander is shut down. If that radio is not powered up then when Commander starts pop up error produced about no

How do I set up wsjtx to also log to dx keeper as well as it's on log file? David KC8IV

Thanks for the info. That should get me going. New computer always take work. ken k5wk

I have an empty "DXLab" directory in my "Documents" directory. I can delete the "DXLab" directory but it is re-created every time I run DXLab Launcher. DXLab Launcher and the 5 applications I use all

Dave, I've got a Flex PGXL which will accept frequency data from a CAT feed in the specific form of the Kenwood IF command. That's the IF+11digits+semicolon sequence. I'm trying to drive a physical se

I did a quick search but couldn't find anything on this. When in DXView Configuration, Rotator Control tab, the N1MM Rotator Selection by Band section, the labels for 2m and 4m appear to be interchang

I cleaned out windows as I could. I used task manager and cleaned applications, and background applic I could find. Also deleted items in the tray at the bottom of the screen. I clicked on launcher wi

With much help from Tim NZ8J, I now have a version of Commander that supports the Yaesu FTDX-10. This effort was a monument to trial-and-error, with more than 25 versions of Commander created by me an

Something is fouled up. It seems DXK thinks it is running, but is not. I display TASK MANAGER I see Commander. Then I see DX Launcher TWICE. DX Keeper is not shown at all. When I display Device Manage

Hi, is it possible to setup FSK RTTY via Winkey? If not, will it be supported in the future? 73 de Uwe, DL4AC

After my latest Windows 10 update, the SC_WSTJ does not start when Spotcollector starts. I have to start SC_WSTJ manually from the filesystem. (Sorry, wrong program name in the subject header)

Is there a way to cut/paste multiple lines in a command sequence? I'm looking for an easy way to insert/delete multiple lines without editing the underlying saved text file. Also, is there a way to de

Any recommendations? I frequently get the message that Commander is already running when attempting to boot it after I had closed it earlier . I have to use the Task Manager to “end use “. Using Win10

I have a 9 pin connector labeled RS232 9 pin on my 2000A. I want to connect it to my software to change bands with the radio. I have the cable and connection point for the computer. I don't know how t

I am probably missing something. I have completed the settings for WSJT-X, JTAlert and DXKeeper so that FT-8 QSO’s will be logged from WSJT via JTAlert to DXKeeper. I get the following error message a