I operate as YN2CC and have a separate mdb file for it. I noticed one contact had the wrong station call. Instead of YN2CC it was AJ9C my stateside call. Can someone direct me to the way (page in the

Hi Guys, I am going in circles here, here is what I am trying to do, I am trying to integrate WSJT so the log info goes to Gridtracker and DXKeeper - Here is what I got so far, and where I am having i

... via the Databases tab of DXView's Configuration window. 73, Dave, AA6YQ

I know I can reset the radio to defaults using the initial command sequence and that works well. I noticed that on Commander startup that although the radio settings were reset how I wanted them, the

Hi Dave, WW is not able to switch my 2Tone reception soundcard selections anymore in the multiradio soundcard screen. Switching them manually in 2Tone works fine. I’m running a Win10 home version 64 b

Issue with dx labs and IC 7610. When radio is connected with Commander, seems almost every time I change bands the scope reference level gets reset to 0. This is not a desired result I've looked and h

If you are using Window Defender Antivirus (Windows 10), update it to its latest malware definition in https://www.microsoft.com/en-us/wdsi/definitions before installing or upgrading to WinWarbler 9.3

Hello, I try to run my ICOM IC-9700 with a DXLab <-> SatPC32 <-> WSJT setup. Therefor I have configured: 1) IC-9700 to SatPC32 via COM-port 2) DXLab Commander connected to SatPC32 using Commander Radi

Hi Dave, Noticed a slight glitch in DXView while working the CW Contest. Luxembourg SP (LX2LX) initially comes up as expected at 50 degs but then immediately jumps to 180 deg. This is the only Europea

The IC-7600 has a CI-V command to switch RIT on and off, which is easily implemented with a button sequence. The commands for that are: FEFE<CIV>E0210100FD -> OFF FEFE<CIV>E0210101FD -> ON Is it possi

Two iCOM radios I use with Commander have sequences that control several functions. Two of these cycle through the choices for "Preamp" and "Attenuation" and they work fine, until I change bands. Thes

I’m not a contester, but I do make some contest contacts while hunting for needed prefixes. I feel obliged to send in a checklog to help those stations I work. I have a question concerning how one rep

I have two radios configured in Commander. I think it remembers the last one used when Commander is shut down. If that radio is not powered up then when Commander starts pop up error produced about no

How do I set up wsjtx to also log to dx keeper as well as it's on log file? David KC8IV

Thanks for the info. That should get me going. New computer always take work. ken k5wk

I have an empty "DXLab" directory in my "Documents" directory. I can delete the "DXLab" directory but it is re-created every time I run DXLab Launcher. DXLab Launcher and the 5 applications I use all

Dave, I've got a Flex PGXL which will accept frequency data from a CAT feed in the specific form of the Kenwood IF command. That's the IF+11digits+semicolon sequence. I'm trying to drive a physical se

I did a quick search but couldn't find anything on this. When in DXView Configuration, Rotator Control tab, the N1MM Rotator Selection by Band section, the labels for 2m and 4m appear to be interchang

I cleaned out windows as I could. I used task manager and cleaned applications, and background applic I could find. Also deleted items in the tray at the bottom of the screen. I clicked on launcher wi

With much help from Tim NZ8J, I now have a version of Commander that supports the Yaesu FTDX-10. This effort was a monument to trial-and-error, with more than 25 versions of Commander created by me an