I have, from time to time, connected to 2 radios using Commander. Set-up as multi-radio and it has worked fine. Now I'm attempting to interconnect to 4 radios and as I get this working I've come up wi

David G3YYD announced 2Tone version 21.03a today. I asked him what changed relative to the 2Tone version 21.02a included with WinWarbler, here is his response: ----------------- The Writelog fix and m

I was previously logging new QSO's to the HRD Logbook and my previous process was to upload the HRD QSO to both LoTW and eQSL. (I would also download the LoTW data to the QRZ logbook to have that log

Janusz Wegrzyn SP9FIH has won the 2020 Single-Operator Cass Award for working 6845 unique stations from Norfolk Island. The HU1DL team has won the 2020 Unlimited Cass Award for working 19456 unique st

I put in the perimeters you told. now I am getting a error Bottom row height exceeds page height -Max 9.35 inches What do I do next? -- 73's de NU4N Dave

Good morning Dave, I just would like to ask whether it is possible to change the QSL Date Format to be printed on cards to dd-mmm-yyyy (4 digit year), of course English month abbreviation. So far this

Please delete the Cass Award message I inadvertently copied to this group. Since the 2020 winners are the leaders in their categories, there's no real element of surprise, but I'd still appreciation y

Hello to the group I'm a new group member and user of Dx Lab software. I have just installed Launcher , Commander and Keeper. Problem... when I click the shortcut to start Launcher it produces the nor

Commander tracks frequency and mode, expect that it shows 'CW' when the rig shows 'CW USB' on 40 meters. Similar results on other bands. Reversing the mode on the rig shows 'CW-R' when the rig shows '

What are the settings for the Avery 8161 ? -- 73's de NU4N Dave

Terry Glagowski / W1TR developed an application called *HFAUTO SW* to control the Palstar HF-AUTO *ATU*. I installed it and connected to to DXLab Commander via the [Net Serv] configuration. Data is se

I believed I may have messed up my registration entries when trying to switch between two logs. I hope I have that straightened out. However, now when I run the Marathon report for 2021 I do not get a

When using WSJT-X with my K3S I occasionally see very bizarre behaviors. Occasionally the radio remains in TX and can only be shut down by powering off the radio. Once in a while the radio goes into T

I have LOTW linked up and I see R on my QSO from the stations I worked.Do I have to set all the LOTW stations before I up load them to LOTW? Rich

+ AA6YQ comments below I went into ADV tab and tried filtering QSO's for a state. + An SQL filter for a particular state - say Florida - would look like this: (DXCCPREFIX='K') and (STATE = 'FL') So I

When entering an SQL expression in the Email Alarm Trigger panel are parenthesis required around the call signs entered? For example: callsign =( 'KH9', 'C91BVA', ZF2BJ'. 'PJ7AA', 'ly11ly') Also are t

Hi,I a, new into the digtial logger,About 5 weeks now.On my paper log I used to star a station and that told me to send a QSL.I see there are provisions for sending and receiving but is there somethin

Hello, In DxKeeper (v1599) I cannot find Alexandria City at the state VA. The call is K1FR and according to QRZ.com information and the photo of the qsl card, Jesse lives in Alexandria City. Is this a

I know a sequence can include a command to control a slider (and I do that). Is it possible for a sequence to include a command to control another sequence? For example: You have a bank for four butto

Recommended size for QSL cards is 90*140 mm. My cards are this size. This size is not in the menu, neither in DXkeeper printer module nor in the printer's menu. The solution is to make a custom define