I am new to DXLab and am transiting from an different logging program. I have successfully imported my existing log and have successfully uploaded that log to LotW and have successfully synced LotW QS

How can I generate a progress report in CSV, instead of TXT? I saw the instructions below but it is not clear where I configure it: Generating Award Progress and Submission Reports The awards for whic

Today WSJT-X stopped logging to DXK. Clicking OK on the Log QSO box has no effect. The QSO just disappeared. Normally the DXK log entry is populated and the QSO is logged. This is not happening. Ive h

Test 73 de W2LCQ, Ed Jones Frankford Radio Club B.U.G. 204 - TBDXC 1337 - CWops 701 (Life) - SKCC 5474T - FISTS 12294 - QCWA 33438 - LICWC 51 - ARRL - New York County (Manhattan) FN30AT “Most certainl

GM all! Lately Spot collector keeps failing to launch. I get two pop up windows one saying Spot collector failed to launch after 60 seconds and then another one 180 seconds. Any help on this would be

I had to resort to reading the instructions about using CW Skimmer with Commander’s secondary port . I see I’m even quoted in that section ! Now , however , I am trying to configure the an Icom . Back

...via the Databases tab of DXView's Configuration window 73, Dave, AA6YQ

Hello, The EMAIL field is part of the export when ADIF is used, but I need to export it as a field in a tab delimited export and this does not seem to be standard when using tab delimited export. I se

Hello Dave, I have been doing quite a bit of 2m EME using MAP65 (a version of WSJT that uses an external SDR receiver to do broadband decoding of JT65 signals reflected off the moon). I am also runnin

Anyone else having issues with VE7CC… NO changes have been made to the setup under “SpotCollector/Config/Spot Sources” : SpotCollector has been unable to connect to VE7CC for the last 24 hours or so.

Hello all....I have just made my first batch upload of 554 contacts to LOTW. After pressing the sync lotw qsos button , I got message that all 554 were processed, 0 errors. All good so far... This is

I have a three radio setup on Commander - IC-9700, IC-7610 and Flex 6400. I'm done with contesting for a bit so decided to just do some casual operation today and suddenly Commander was no longer talk

Hello, since about October 12, 2020 I can not get the NAME and QTH data from QRZ.COM into a new QSO Log in DXKeeper by clicking the "CBA" button. Surprisingly the email address of a new contact for ex

The following message started coming up when I start DXKeeper: "This QSO has not been unlocked for modification; set its end time?" The upper boxes are flashing red and blue but they are blank. I have

I'm trying to limit one of my spot sources to - My call, no matter where spotted OR Skimmer spots from Zone 5 that ARE NOT of K or VE stations IF the skimmer spots are validated. The macro should read

FYI 73, Dave, AA6YQ -----Original Message----- From: ARRL-LoTW@... [mailto:ARRL-LoTW@...] On Behalf Of Greg K0GW Sent: Friday, October 16, 2020 10:52 AM To: ARRL-LoTW@... Subject: [ARRL-LoTW] LoTW now

The diagnostic procedure described in message <https://groups.io/g/DXLab/message/196791> of the "LoTW upload first time" thread is now available with an annotated screen shot in <https://www.dxlabsuit

Hi Dave - Fix? Jim K7EG 2020-10-15 14:49:05 > SC_WSJTX version 1.0.3 2020-10-15 14:49:05 > App.Path : C:\DXLab\SpotCollector 2020-10-15 14:49:05 > App.exe : SC_WSJTX 2020-10-15 14:49:05 > Module : C:\

What is the best way to enter a general comment in the log? Such as when one starts to use a new amplifier or make certain adjustments to an antenna. I would like to find a way to put this on the time

I have an Icom IC7300 connected to Com 3. The DXLab Commander connects to the Icom using COM3 at 115200 baud. I have a Com0Com pair set up as COM 14 & com 15. The secondary CAT in DXLab Commander is s