Goodday everyone, I'm Hans PA3AZA in the Netherlands, and new here, just having started using CAT to control my old hf rig Yaesu FT-757GXII. After first having solved the problem with the Prolific USB

About a month ago after a driver update, WinWarbler started to take a minute or more to launch and slow to close. All other apps start up and close reasonably fast. I have seen posts from time to time

Running SpotCollector 9.1.0 on Win 10, 64 bit 8 core AMD processor. Haven't used the Audio Alarm feature for a couple of years and just activated it yesterday. There are random delays of around 5 seco

I'm attempting to (successfully) configure my K3, WSJT-X, DXLabs Commander, and Win4K3 so that i can operate in FT8 mode. My problem is that although WSJT-X appears to work properly in all other respe

Is there a way to select bands to display in PropView? Apologies if it is obvious, but I couldn't find it. Or to make the window larger? In this example, because 6m is included, it's very difficult to

Howdy- I've seen a few posts on this but haven't been able to track it down until this morning here. Running SC 9.1.0. I have 3 sources, 1 a local midwest cluster that only has spots originating from

Hello, I am using 4 instances of WSJT-X together with a Flexradio 6600 and DXLab (DXKeeper, DXView, PropView, Spotcollector). Everything works very well. This includes the transfer of a call from Spot

I have added a diagram and description of the three levels of spot filtering available to SpotCollector users: https://www.dxlabsuite.com/dxlabwiki/SpotDatabaseFilter 73, Dave, AA6YQ

How do I see ssb on the clusters? All I see is FT-8 and FT-4 Thanks and 73 -- Steven Stuckey - AC9GK - Ohio

i have 2 transceivers on 2 seperate com ports controlled by hamlib rigctl is there any support to connect to the hamlib interface on a port instead of connecting the rig thru a serial port? thanks

Hello Dave and all, what do you think about the following change in the progress table: Rename the column DIGI to RTTY, listing only real RTTY contacts, and rename the column PSK to show all other dig

I am looking how to spot my receive freq when using split when working tx5n... and spot them.. it is my freq that I worked them at when I spot it from dxkeeper to Spot collector.. so SC is looking tha

Just for other’s info and maybe could be added to the help file (I did not see it today). Card Aging (run from the Check Progress tab), Config for it in Report section. The maximum card aging reported

Hi guys, Lately I've been doing a lot of portable operations. I haven't taken the time to create a new myQTH ID for each activation and I want to know if it's worth the effort. I really want to keep m

I moved QTH from HI to former QTH back in ILL. I created a new log and exported my old ILL log to ADIF, and imported it to DXkeeper. All seemed to work fine. I uploaded all the old QSOs to LOTW, again

...via the Databases tab of DXView's Configuration window. Reminder: terminate DXKeeper and SpotCollector before directing DXView to upgrade these databases. 73, Dave, AA6YQ

This last weekend, I took part in the Michigan QSO Party as W5DT/8 (my regular call is W5DT). I THOUGHT I changed my station call temporarily to W5DT/8 in the Auxiliary window by going into Config/def

Are my QTH's stored in the main DXK mdb file? So I if backup my DB will that save my QTH's?? Thanks 73 Kent N6WT

I made an error on a contact and recorded the mode as FT8 when it should be CW. I believe you can change the uploaded contact but I can't figure out how. W0MU

Dave, for many years now I have been enjoying the use of your software and the support you give; while I was switching workspaces, I realized I use a lot of them, frequently 3 different ones in a day,