I am looking at the WWV info on SC. Mine is currently showing 11-18 15;06Z. The current time is 11-19 02:54Z. Why does it not update regularly? Thanks 73 Kent N6WT

+ AA6YQ comments below Don't know why you don't see the FT-891 in the Commander list, but I wouldn't have spent a lot of time developing user defined sequences for an unsupported radio! Works fine her

Dave it was brought to my attention on the FT-891 group that the Yaesu FT-891 isn't listed in the list of supported radios for Commander. -- John P. WA2FZW

Sent from Mail for Windows Hello ….I have been running DX Labs suite and HDSDR with a TS-590SG and a TS50D for years with little trouble but today after the latest Windows Feature update…I have lost r

Hello all…today I turned my system back on and restarted DXlabs. All went well except I got an errorlog.txt From Spotcollector and my window there is blank..nothing is happening… Never had a problem b

I have Spot Collector filtered for just FT8, but when I click on any of those FT8 spots, my Flex 6600 changes to the correct band and freq but changes the radio mode to SSB. Any ideas on how to correc

I have not uploaded QSOs to Clublog from DXLab, but I have uploaded all my QSOs in the past, under 7 different calls. DXLab does not know which QSOs have been uploaded to Clublog. How can I generate a

Is there a way to setup DXKeeper to automatically log my QSO's to QRZ.com?

John, I see from https://groups.io/g/FT-891/message/957 that you have developed user-defined command sequences to control your FT-891 from DXLab's Commander component. Could you upload them to https:/

I sometimes get a Windows "Security Warning" (see a screenshot of it at https://groups.io/g/DXLab/files/Security%20Warning%20from%20Pathfinder-Screenshot%202022-11-16.jpg ) from Pathfinder when clicki

Try this and see if it works. http://www.dxlabsuite.com/dxlabwiki/RecoverWindow <http://www.dxlabsuite.com/dxlabwiki/RecoverWindow> Bruce McLain - K5WBM bruce.mclain@...

I finally got commander setup to work with my FTDX3000 Yaesu. But, when I shut commander down and brought it back up the "word" length changed from 8 to 6. Change it back to 8 works but I have to do i

Today when I sync'd eQSL.cc QSLs, I got "Error message from eQSL.cc: No such Username/Password found". It had worked previously and I had not made any changes to the QSL config. I confirmed that the U

Email

Last week there was an update to correct the grids or zones of at least two entities and an instruction on how to apply the corrections if those entities had been worked. I did the update but lost the

I noticed that there are DXCC databases in DXKeeper/Databases, SpotCollector/Databases, and of course DXView/Databases. These have differing dates with the most recent being the upgraded one in DXView

Is it simple to make a filter for spot collector so that I am alerted when someone is CQing like for SOTA or POTA? like either CQ POTA or CQ SOTA or maybe in the comment area like SOTA OR POTA is ment

when I have Commander running….and start WSJTX, it starts to load then closes immediately….. If I close Commander….WSJTX runs fine.. commander is connected to my Flex….

If you are using Window Defender Antivirus (Windows 10 or 11), update it to its latest malware definition in https://www.microsoft.com/en-us/wdsi/definitions before installing or upgrading to WinWarbl

What does the bold font of the queue size indicate on spot collector? tnx jim ab3cv