I’m stumped on this. I am tracking Marathon mixed mode. When I get a spot for CN8YZ, it appears in spot collector in black. When I click on that spot and look at Realtime Award tracking it shows Mixed

Good morning, I would like to have all my Sota station filtered so that I can create an adif file and upload it to the website https://www.cqgma.org/gw1001.php. Can someone tell me how to filter only

Dave, Been recently operating a little FT8. I'm logging from JTalert with no lookup but JTAlert is requesting DXK to lookup and fill in the blanks. It seems not sending a gridsquare is in vogue so man

Dave, Today I went to print my qsl and now I see on the labels that there is no longer a PSE or TNX. I've checked all settings but can't seem to get it right. I'm using DXkeeper 16.5.5 do you have any

Lately I have been having trouble with WW and I am not sure what is causing the behavior I am seeing. First, my setup is unchanged since 2019 other than DXLab and Windows updates both of which should

I have been using DXLabs programs on Windows 11 since it came out. Now, if I run any of the DXLabs programs. There is no window interface. If I attempt to run again it indicates the program is already

I've played around with syntax such as Callsign Like 'FT5*' Callsign='OH2BH' as described in the "Using The Spot Database " but I want to filter by several callsigns of different entities . So, if for

1. The popup window below comes on immediately after DXKeeper loads. 2. The following popup windows come on a few seconds after clicking the “OK to Confirm” popup from DXKeeper. However, the station’s

Hello again, As I asked in a previous question, propagation probabilities are often missing in spot collector, especially for FT8 spots. However, there is a pattern here in that spots in blue and red

If I am running cw skimmer prior to starting DXLab software, DXLab becomes extremely slow to startup….I am talking minutes…. Tim wa5yom

Most likely a pilot error problem. I have not used SpotCollector in MANY months. I opened it today and I see many spots from NC7J. I also have VE7CC as a spot source but it won't connect. I get this e

+ AA6YQ comments below Hi all IC7300 users with spectrum display activated. Mode Auto Track is checked in Spectrum Config. Clicking on a call's text displayed in the spectrum window or in Spotcollecto

After finally making 5BDXCC, I applied credits over the weekend. The credits were awarded today, so I downloaded the credits, performed analyze and did autolink. Afterwards I noticed DXKeeper had erro

Bring up the programs, Spotcollector comes up, displays old spots. The cluster feeds connect and get green lights, I can look at the clusters and they are sending spots - but nothing shows up on Spotc

I occasionally need to modify a few qsos that I have uploaded to LOTW incorrectly. What is the correct procedure to do this upload? In the past I have received a screen telling me that “.adi file alre

+ AA6YQ comments below I have a Node red flow connected to Commander Netserv UDP12061, however after some time the connection fails with an invalid udp address/port popup at Commander. Click ok and re

I was on 10m FT8 and worked a VP2 station. He used LoTW. I did not have either Digi or FT8 confirmed in DXView. Later I did the "Sync LoTW QSLs". The DXKeeper report said 2 QSLs processed and "NO new

Is it possible to activate the "Tune" function of the Icom IC-706 using one of the user defined buttons in Commander?

When I double click on an SC spot Commander frequency changes but the Icom 7300 rig frequency doesn’t change. If I then change the rig frequency Commander stays on the SC frequency and doesn’t follow

If i double click on a spot in SC should the gateway to WSJT cause WSJT to follow to the spotted band? 73 jim ab3cv