Three sources all generating 6 meter spots. Not one showing up in the database. All bands are checked. Filter on 6 m only and nothing in the data base What's up? Don WB6BEE

To find a beam heading, I just tried a FILTER DXCC inquiry for T31 on DXKeeper. DXView came back with a heading of 352 degrees when it should have been maybe 260 degrees. Within DXview it is showing l

Been a while since I submitted cards in person, whats the current procedure?

I know it's a common filter to show needed countries, confirmed etc. I would like my log to have a popup that tells me if the country has already been worked. This wold be like the message that tells

<WAIT> is fixed at the length of "Control Interval" in Commander. Thus, if Control Interval is 100 ms and you want a delay of 2 seconds, you will need to use 20 <WAIT> commands. 73, ... Joe, W4TV

I think an alien took residence in my pc, everything was working fine.....then....my IC7610, which is connected to COM6, suddenly started going into transmit, every 12 seconds, for 5 seconds.....it wo

Picked this out of the ARRL '23 Annual Meeting summary that Fred Kemmerer, AB1OC, my NE Director published. "A Radiosport Platform Committee was created to develop a plan and specifications for evolvi

Today I was trying to work a SOTA friend on a summit. She was at 18.091 CW. In SpotCollector she was spotted as 18.091 CW. I double clicked the spot and the radio changed to 18.091 DIGU. I figured it

I wanted to display only EU 6m contacts so I selected DXK's "Adv" button. There I selected the 6m Band Filter and in Modify QSOs ... I selected the CONT Item name and EU for the new value. I clicked o

can I setup 2 instances of commander? Looking for a way to control 3 radios. I know I can change the com ports in the 2nd port window. Would like to be able not to have to change the ports band and fo

The only uncertainty is "when". To protect your DXLab data, see https://www.dxlabsuite.com/dxlabwiki/BackupRecovery 73, Dave, AA6YQ

The only uncertainty is "when". To protect your DXLab data, see https://www.dxlabsuite.com/dxlabwiki/BackupRecovery 73, Dave, AA6YQ

Dear colleagues, best regards. I have created a command to turn On the NR on my radio (kenwoodTS990) - it works perfect. However to turn NR OFF I have a second button. I was looking in the manual if t

Hi Dave, I do a lot of DX spotting using Spot Collector, particularly for stations I’ve worked before. For newly worked stations, I use the newly created log entry to create the DX spot. I after I ent

I'd like to see what I've worked on 6 meters. How do I do that with dxkeeper? Frank KA9J

My computer lost its mind and would not boot. After 2 hours of debugging (it wouldn't even go into Safe Mode), I had to reset it, keeping my data. Is there any way to restore the suite without reinsta

From the "Sync Lotw QSL's" report I get a large number of "IOTA candidate doesn't specify an IOTA tag" reports. Can I shut those off or have it ignore them? 73 Dwight NS9I On 5/20/2023 12:27 AM, Dave

After 12 years the workhorse computer has gotten too slow to be used reliably. The new one is now built and configured and so now it's time to move DXLab on to it. I've been looking around in the docu

I use DXView to make a quick check to see if I need a DXCC entity I'm hearing for a new band or mode. I've recently discovered that some QSOs in my DXKeeper log that have correct information do not sh

Is there a configuration option such that if set, will cause DXLog Keeper to prefer (without a dialog window each time) that any inconsistencies between the GridSquare in the local log vs the GridSqua