I would like to create User-defined Controls in Commander to "directly" load and unload FT8 Presets in the ICOM 7300 and 9700. By "directly" I mean achieving the same result as tapping the radio scree

This morning Spotcollecter came up with a layout of just two rows or boxes with just two in each row. It connects to my spot source but the blue 'Autoscroll' label with the line through it just keeps

Hellos folks! There seems to be a large increase in the number of JPG QSL cards that are being emailed rather than mailed via the bureau. Dave, are there any plans to add this type of feature to DXLab

Has any one made sequences for CW memories for the IC7300??

In the grand plans for development, is there momentum towards support of persisting QSO log data in remote MySQL? If not, that's fine. Just wondering. In the past when I did use other logging software

Test CAT gives me "Rig Failure. Failed to connect to DX Lab Suite Commander Connection Refused." My TS-590S works fine with Commander. In NetSrv I have UDP 1 as 127.0.0.1 port 12060, and UDP 2 as 127.

I found this function in an older post from Dave to limit spots in the spot data base to 15 minutes old or less AND (LASTTIME > (DATEADD("n",-15,NOW()))) I added that to my FOC SQL filter to limit FOC

I recently submitted 144 LOTW qsls for my DXCC award, all went well, except for one, I have a lotw confirmation from UJ on 10m cw, its confirmed in LOTW, but, DXkeeper just shows an R. I did a right c

I get an error message when starting Commander that port 9200 is already in use, as I had previously closed N1MM which was also connected via TCP to my Elecraft K4D. Since the K4D can be controlled vi

To find a beam heading, I just tried a FILTER DXCC inquiry for T31 on DXKeeper. DXView came back with a heading of 352 degrees when it should have been maybe 260 degrees. Within DXview it is showing l

I have noticed lately that callsigns are shown with different background colors in SpotCollector and WinWarbler. It seems WinWarbler does not honor the "maximum LOTW age" set in DXKeeper's QSL configu

My computer lost its mind and would not boot. After 2 hours of debugging (it wouldn't even go into Safe Mode), I had to reset it, keeping my data. Is there any way to restore the suite without reinsta

Been a while since I submitted cards in person, whats the current procedure?

Three sources all generating 6 meter spots. Not one showing up in the database. All bands are checked. Filter on 6 m only and nothing in the data base What's up? Don WB6BEE

I know it's a common filter to show needed countries, confirmed etc. I would like my log to have a popup that tells me if the country has already been worked. This wold be like the message that tells

<WAIT> is fixed at the length of "Control Interval" in Commander. Thus, if Control Interval is 100 ms and you want a delay of 2 seconds, you will need to use 20 <WAIT> commands. 73, ... Joe, W4TV

I think an alien took residence in my pc, everything was working fine.....then....my IC7610, which is connected to COM6, suddenly started going into transmit, every 12 seconds, for 5 seconds.....it wo

Picked this out of the ARRL '23 Annual Meeting summary that Fred Kemmerer, AB1OC, my NE Director published. "A Radiosport Platform Committee was created to develop a plan and specifications for evolvi

Today I was trying to work a SOTA friend on a summit. She was at 18.091 CW. In SpotCollector she was spotted as 18.091 CW. I double clicked the spot and the radio changed to 18.091 DIGU. I figured it

I wanted to display only EU 6m contacts so I selected DXK's "Adv" button. There I selected the 6m Band Filter and in Modify QSOs ... I selected the CONT Item name and EU for the new value. I clicked o