Date
1 - 3 of 3
PropView 1.0.2 is available
Dave Bernstein <dhb@...>
This release corrects the runtime error occuring on systems with a
locale that doesn't use the period character as a decimal separator.
(Ron, this should correct the problem you are encountering with
1.0.1).
If you already have PropView 1.0.1 installed, you can upgrade by
downloading and running www.qsl.net/propview/PropView102Update.exe --
it will update your online help and install PropView102.exe, which
you can then run.
73,
Dave, AA6YQ
locale that doesn't use the period character as a decimal separator.
(Ron, this should correct the problem you are encountering with
1.0.1).
If you already have PropView 1.0.1 installed, you can upgrade by
downloading and running www.qsl.net/propview/PropView102Update.exe --
it will update your online help and install PropView102.exe, which
you can then run.
73,
Dave, AA6YQ
Ron Eberson <zx@...>
YES HE WORKS DAVE thanks for it.
Is it posible to save some settings like power and wave angel of antenna?
Also on the fig you can see not the top of the 7 from 17 meters.
Can we change the size of the window from Propview so that you can see the
both DXView and Porpview on the screen compleet?
Thanks in advance and the time you take for all of us.
-----Oorspronkelijk bericht-----
Van: Dave Bernstein [mailto:dhb@...]
Verzonden: woensdag 4 april 2001 7:23
Aan: dxlab@...
Onderwerp: [dxlab] PropView 1.0.2 is available
This release corrects the runtime error occuring on systems with a
locale that doesn't use the period character as a decimal separator.
(Ron, this should correct the problem you are encountering with
1.0.1).
If you already have PropView 1.0.1 installed, you can upgrade by
downloading and running www.qsl.net/propview/PropView102Update.exe --
it will update your online help and install PropView102.exe, which
you can then run.
73,
Dave, AA6YQ
To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Is it posible to save some settings like power and wave angel of antenna?
Also on the fig you can see not the top of the 7 from 17 meters.
Can we change the size of the window from Propview so that you can see the
both DXView and Porpview on the screen compleet?
Thanks in advance and the time you take for all of us.
-----Oorspronkelijk bericht-----
Van: Dave Bernstein [mailto:dhb@...]
Verzonden: woensdag 4 april 2001 7:23
Aan: dxlab@...
Onderwerp: [dxlab] PropView 1.0.2 is available
This release corrects the runtime error occuring on systems with a
locale that doesn't use the period character as a decimal separator.
(Ron, this should correct the problem you are encountering with
1.0.1).
If you already have PropView 1.0.1 installed, you can upgrade by
downloading and running www.qsl.net/propview/PropView102Update.exe --
it will update your online help and install PropView102.exe, which
you can then run.
73,
Dave, AA6YQ
To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Dave, AA6YQ <dhb@...>
By "save some settings", I assume you mean between PropView sessions. Power
and WaveAngle are saved between sessions -- I checked this on both US and
European configurations.
When you close PropView, is it terminating normally or are you seeing an
error message? Perhaps PropView is terminating abnormally before it saves
your modified settings.
The frequency display is dynamic -- when the range of frequencies is large,
the ham bands get scrunched together and the labels overlap, resulting in
the problem you noticed with the 7 in 17 meters. Perhaps there's a way to
miminize this by making the labels alternate positions -- I'll think about
it...
DXView's and PropView's windows are as compressed as I know how to make them
without sacrificing useability. The only way to make them smaller would be
to adopt a smaller font size, which I'm reluctant to implement given the
periodic comments I get about the fonts already being too small. The more
DXLab applications you run, the more screen space you need; I don't know how
to work around this without making the applications much harder to use; the
good news is that higher-resolution display systems (1024x768, 1280x1024,
1600x1200) have gotten a lot less expensive over the past few years.
Alternate suggestions would be appreciated.
73,
Dave, AA6YQ
toggle quoted message
Show quoted text
and WaveAngle are saved between sessions -- I checked this on both US and
European configurations.
When you close PropView, is it terminating normally or are you seeing an
error message? Perhaps PropView is terminating abnormally before it saves
your modified settings.
The frequency display is dynamic -- when the range of frequencies is large,
the ham bands get scrunched together and the labels overlap, resulting in
the problem you noticed with the 7 in 17 meters. Perhaps there's a way to
miminize this by making the labels alternate positions -- I'll think about
it...
DXView's and PropView's windows are as compressed as I know how to make them
without sacrificing useability. The only way to make them smaller would be
to adopt a smaller font size, which I'm reluctant to implement given the
periodic comments I get about the fonts already being too small. The more
DXLab applications you run, the more screen space you need; I don't know how
to work around this without making the applications much harder to use; the
good news is that higher-resolution display systems (1024x768, 1280x1024,
1600x1200) have gotten a lot less expensive over the past few years.
Alternate suggestions would be appreciated.
73,
Dave, AA6YQ
-----Original Message-----
From: Ron Eberson [mailto:zx@...]
Sent: Wednesday, April 04, 2001 1:32 AM
To: dxlab@...
Subject: RE: [dxlab] PropView 1.0.2 is available
YES HE WORKS DAVE thanks for it.
Is it posible to save some settings like power and wave angel of antenna?
Also on the fig you can see not the top of the 7 from 17 meters.
Can we change the size of the window from Propview so that you can see the
both DXView and Porpview on the screen compleet?
Thanks in advance and the time you take for all of us.
-----Oorspronkelijk bericht-----
Van: Dave Bernstein [mailto:dhb@...]
Verzonden: woensdag 4 april 2001 7:23
Aan: dxlab@...
Onderwerp: [dxlab] PropView 1.0.2 is available
This release corrects the runtime error occuring on systems with a
locale that doesn't use the period character as a decimal separator.
(Ron, this should correct the problem you are encountering with
1.0.1).
If you already have PropView 1.0.1 installed, you can upgrade by
downloading and running www.qsl.net/propview/PropView102Update.exe --
it will update your online help and install PropView102.exe, which
you can then run.
73,
Dave, AA6YQ
To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Yahoo! Groups Sponsor
Click here for Business information
To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
From: Ron Eberson [mailto:zx@...]
Sent: Wednesday, April 04, 2001 1:32 AM
To: dxlab@...
Subject: RE: [dxlab] PropView 1.0.2 is available
YES HE WORKS DAVE thanks for it.
Is it posible to save some settings like power and wave angel of antenna?
Also on the fig you can see not the top of the 7 from 17 meters.
Can we change the size of the window from Propview so that you can see the
both DXView and Porpview on the screen compleet?
Thanks in advance and the time you take for all of us.
-----Oorspronkelijk bericht-----
Van: Dave Bernstein [mailto:dhb@...]
Verzonden: woensdag 4 april 2001 7:23
Aan: dxlab@...
Onderwerp: [dxlab] PropView 1.0.2 is available
This release corrects the runtime error occuring on systems with a
locale that doesn't use the period character as a decimal separator.
(Ron, this should correct the problem you are encountering with
1.0.1).
If you already have PropView 1.0.1 installed, you can upgrade by
downloading and running www.qsl.net/propview/PropView102Update.exe --
it will update your online help and install PropView102.exe, which
you can then run.
73,
Dave, AA6YQ
To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Yahoo! Groups Sponsor
Click here for Business information
To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.