i see band segments    but only find the band limits ,,.. no
specificity for what freqs cause what modes

SpotCollector -> Config -> Sub-band Definition

For the most up to date select "BandModes 2022-12-06.txt" or
create your own patterned after that file.  Details are in
the SC Help files.

73,

   ... Joe, W4TV

On 3/25/2023 5:20 AM, bill steffey NY9H wrote:

I've been trying to find where the 'database' is for  "mode by frequency"    to see if i can tighten up the fsk "territories'


I've scoured the commander /dxkeeper ..lookiunf doe the databases .etc but can't figure out how to let me control the modes by freq


i see band segments    but only find the band limits ,,.. no specificity for what freqs cause what modes


i am NEVER awake at this hour ,,,,just woke up ..

bill

i see band segments    but only find the band limits ,,.. no
specificity for what freqs cause what modes

SpotCollector -> Config -> Sub-band Definition

For the most up to date select "BandModes 2022-12-06.txt" or
create your own patterned after that file.  Details are in
the SC Help files.

73,

   ... Joe, W4TV

On 3/25/2023 5:20 AM, bill steffey NY9H wrote:

I've been trying to find where the 'database' is for  "mode by frequency"    to see if i can tighten up the fsk "territories'


I've scoured the commander /dxkeeper ..lookiunf doe the databases .etc but can't figure out how to let me control the modes by freq


i see band segments    but only find the band limits ,,.. no specificity for what freqs cause what modes


i am NEVER awake at this hour ,,,,just woke up ..

bill

HI Joe,

i am using that txt file   2022-12-06.....       and it looks good..   I must have changed something in jtalert... which is the culprit..  I leave it up while jumping from ft4  to ssb   ...  now to dig into that config...   but it's flipping to afsk  rather than data  ssb when applicable .


so many options,,,  so little time  !!!

tnx agn.    wow last night HF was DEAD here in WPA/// probably not so good for the contesters.



On 3/25/2023 9:07 AM, Joe Subich, W4TV wrote:

i see band segments    but only find the band limits ,,.. no
specificity for what freqs cause what modes

SpotCollector -> Config -> Sub-band Definition

For the most up to date select "BandModes 2022-12-06.txt" or
create your own patterned after that file.  Details are in
the SC Help files.

73,

   ... Joe, W4TV

On 3/25/2023 5:20 AM, bill steffey NY9H wrote:

I've been trying to find where the 'database' is for  "mode by frequency"    to see if i can tighten up the fsk "territories'


I've scoured the commander /dxkeeper ..lookiunf doe the databases .etc but can't figure out how to let me control the modes by freq


i see band segments    but only find the band limits ,,.. no specificity for what freqs cause what modes


i am NEVER awake at this hour ,,,,just woke up ..

bill

OOPs     i turned of wsjt,   jt alert is still up ....   so MY problem is in one of those...
On 3/25/2023 9:42 AM, bill steffey NY9H wrote:

HI Joe,

i am using that txt file   2022-12-06.....       and it looks good.. I must have changed something in jtalert... which is the culprit..  I leave it up while jumping from ft4  to ssb   ...  now to dig into that config...   but it's flipping to afsk  rather than data  ssb when applicable .


so many options,,,  so little time  !!!

tnx agn.    wow last night HF was DEAD here in WPA/// probably not so good for the contesters.



On 3/25/2023 9:07 AM, Joe Subich, W4TV wrote:

i see band segments    but only find the band limits ,,.. no
specificity for what freqs cause what modes

SpotCollector -> Config -> Sub-band Definition

For the most up to date select "BandModes 2022-12-06.txt" or
create your own patterned after that file.  Details are in
the SC Help files.

73,

   ... Joe, W4TV

On 3/25/2023 5:20 AM, bill steffey NY9H wrote:

I've been trying to find where the 'database' is for  "mode by frequency"    to see if i can tighten up the fsk "territories'


I've scoured the commander /dxkeeper ..lookiunf doe the databases .etc but can't figure out how to let me control the modes by freq


i see band segments    but only find the band limits ,,.. no specificity for what freqs cause what modes


i am NEVER awake at this hour ,,,,just woke up ..

bill

JT Alert does not do anything with rig control.  I don't know
how WSJTX could command the rig into FSK - even if it is set
to use DATA mode with an Elecraft rig.

I would check your settings in SpotCollector -> Config -> General
for Digital Mode Application, Transceiver mode for WSXJ-X,
Actions with Digital Mode Application connected and Transceiver
mode with no Digital Mode Application Connected.

73,

   ... Joe, W4TV

On 3/25/2023 9:48 AM, bill steffey NY9H wrote:

OOPs     i turned of wsjt,   jt alert is still up ....   so MY problem is in one of those...

On 3/25/2023 9:42 AM, bill steffey NY9H wrote:

HI Joe,

i am using that txt file   2022-12-06.....       and it looks good.. I must have changed something in jtalert... which is the culprit..  I leave it up while jumping from ft4  to ssb ...  now to dig into that config...   but it's flipping to afsk  rather than data  ssb when applicable .


so many options,,,  so little time  !!!

tnx agn.    wow last night HF was DEAD here in WPA/// probably not so good for the contesters.



On 3/25/2023 9:07 AM, Joe Subich, W4TV wrote:

i see band segments    but only find the band limits ,,.. no
specificity for what freqs cause what modes

SpotCollector -> Config -> Sub-band Definition

For the most up to date select "BandModes 2022-12-06.txt" or
create your own patterned after that file.  Details are in
the SC Help files.

73,

   ... Joe, W4TV

On 3/25/2023 5:20 AM, bill steffey NY9H wrote:

I've been trying to find where the 'database' is for  "mode by frequency"    to see if i can tighten up the fsk "territories'


I've scoured the commander /dxkeeper ..lookiunf doe the databases .etc but can't figure out how to let me control the modes by freq


i see band segments    but only find the band limits ,,.. no specificity for what freqs cause what modes


i am NEVER awake at this hour ,,,,just woke up ..

bill

tnx fer help   I'll do  it all....      and it used to work fine ( arg!)

On 3/25/2023 11:12 AM, Joe Subich, W4TV wrote:

JT Alert does not do anything with rig control.  I don't know
how WSJTX could command the rig into FSK - even if it is set
to use DATA mode with an Elecraft rig.

I would check your settings in SpotCollector -> Config -> General
for Digital Mode Application, Transceiver mode for WSXJ-X,
Actions with Digital Mode Application connected and Transceiver
mode with no Digital Mode Application Connected.

73,

   ... Joe, W4TV

On 3/25/2023 9:48 AM, bill steffey NY9H wrote:

OOPs     i turned of wsjt,   jt alert is still up ....   so MY problem is in one of those...

On 3/25/2023 9:42 AM, bill steffey NY9H wrote:

HI Joe,

i am using that txt file   2022-12-06.....       and it looks good.. I must have changed something in jtalert... which is the culprit..  I leave it up while jumping from ft4  to ssb ...  now to dig into that config...   but it's flipping to afsk  rather than data  ssb when applicable .


so many options,,,  so little time  !!!

tnx agn.    wow last night HF was DEAD here in WPA/// probably not so good for the contesters.



On 3/25/2023 9:07 AM, Joe Subich, W4TV wrote:

i see band segments    but only find the band limits ,,.. no
specificity for what freqs cause what modes

SpotCollector -> Config -> Sub-band Definition

For the most up to date select "BandModes 2022-12-06.txt" or
create your own patterned after that file.  Details are in
the SC Help files.

73,

   ... Joe, W4TV

On 3/25/2023 5:20 AM, bill steffey NY9H wrote:

I've been trying to find where the 'database' is for  "mode by frequency"    to see if i can tighten up the fsk "territories'


I've scoured the commander /dxkeeper ..lookiunf doe the databases .etc but can't figure out how to let me control the modes by freq


i see band segments    but only find the band limits ,,.. no specificity for what freqs cause what modes


i am NEVER awake at this hour ,,,,just woke up ..

bill