Topics

commander config information went away

Jeffrey griffin
 

 

I changed radios today via the normal selection list in commander and got an error, as the radio I switched to was powered off. So I do what I usually do, closed commander, turned on the radio in question, and restarted Commander. What happened is something I’ve never seen before, I got the same port error when Commander tried to start, and then the same error again, then when Commander started up all my radio configuration information was gone, the radio list in the main window is blank, and there is no info in config, MultiRadio, or Ports except for my K3. Odd thing, my K3 is configured and working properly but only shows up in, Config, Ports. My 9100, 6500, and SatPC32 are missing.   Is there some way to recover, or do I have to re configure everything? Here is the errorlog from the event( I think, if not it’s the only data from today)….

 

2020-07-05 19:34:19     > CI-V Commander version 14.6.2

2020-07-05 19:34:19     > App.Path          : C:\DXLab\Commander

2020-07-05 19:34:19     > App.exe           : CI-V Commander

2020-07-05 19:34:19     > Module            : C:\DXLab\Commander\CI-V Commander.exe

2020-07-05 19:34:19     > Operating System  : Windows 10 Enterprise (64-bit) build 18363

2020-07-05 19:34:19     > Locale ID         : 1033 (0x409)

2020-07-05 19:34:19     > ANSI CodePage     : 1252

2020-07-05 19:34:19     > OEM CodePage      : 437

2020-07-05 19:34:19     > Country           : United States

2020-07-05 19:34:19     > Language          : English

2020-07-05 19:34:19     > DecimalSeparator  : .

2020-07-05 19:34:19     > ThousandSeparator : ,

2020-07-05 19:34:19     > DXLab Apps        :

2020-07-05 19:36:38     > Monitors          : 2

2020-07-05 19:36:38     > Monitor 1

2020-07-05 19:36:38     >    width          : 1920

2020-07-05 19:36:38     >    height         : 1080

2020-07-05 19:36:38     >    dimensions     : (0, 0)-(1920, 1080)

2020-07-05 19:36:38     > Monitor 2

2020-07-05 19:36:38     >    width          : 1920

2020-07-05 19:36:38     >    height         : 1080

2020-07-05 19:36:38     >    dimensions     : (1920, 0)-(3840, 1080)

2020-07-05 19:36:38.844 > program error 365 in module CIVMain.QueryUnload: Unable to unload within this context

 

73 Jeff kb2m

Dave AA6YQ
 

+ AA6YQ comments below

I changed radios today via the normal selection list in commander and got an error, as the radio I switched to was powered off. So I do what I usually do, closed commander, turned on the radio in question, and restarted Commander. What happened is something I’ve never seen before, I got the same port error when Commander tried to start, and then the same error again, then when Commander started up all my radio configuration information was gone, the radio list in the main window is blank, and there is no info in config, MultiRadio, or Ports except for my K3.

+ I've never seen that error before, either.

Odd thing, my K3 is configured and working properly but only shows up in, Config, Ports. My 9100, 6500, and SatPC32 are missing. Is there some way to recover, or do I have to re configure everything?

+ Direct the Launcher to recover Commander's settings from the Workspace you created or updated after getting Commander correctly configured; see the Loading the Windows Registry with One Selected DXLab Application's Settings from a Workspace" section in

<https://www.dxlabsuite.com/dxlabwiki/CreateUpdateWorkspace>

73,

Dave, AA6YQ

Jeffrey griffin
 

Of course I never created a workspace here , just on my radio control computer up north, and my laptop. Lesson learned....

73 Jeff kb2m

-----Original Message-----
From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Dave AA6YQ
Sent: Sunday, July 05, 2020 16:33
To: DXLab@groups.io
Subject: Re: [DXLab] commander config information went away

+ AA6YQ comments below

I changed radios today via the normal selection list in commander and got an error, as the radio I switched to was powered off. So I do what I usually do, closed commander, turned on the radio in question, and restarted Commander. What happened is something I’ve never seen before, I got the same port error when Commander tried to start, and then the same error again, then when Commander started up all my radio configuration information was gone, the radio list in the main window is blank, and there is no info in config, MultiRadio, or Ports except for my K3.

+ I've never seen that error before, either.

Odd thing, my K3 is configured and working properly but only shows up in, Config, Ports. My 9100, 6500, and SatPC32 are missing. Is there some way to recover, or do I have to re configure everything?

+ Direct the Launcher to recover Commander's settings from the Workspace you created or updated after getting Commander correctly configured; see the Loading the Windows Registry with One Selected DXLab Application's Settings from a Workspace" section in

<https://www.dxlabsuite.com/dxlabwiki/CreateUpdateWorkspace>

73,

Dave, AA6YQ