Topics

Commander and TS-590s


Pete N4KW
 

I see that Commander does not support a Kenwood TS-590s.  Anyway to use
DXLab with the 590s.

73, Pete, N4KW


Mike, K9UW
 

Hi Pete,

The 590S works fine with DXLab. See https://www.dxlabsuite.com/dxlabwiki/TranceiverControlKenwood for the setup.

73,

Mike, K9UW
Amherst, WI

-----Original Message-----
From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Pete N4KW
Sent: Sunday, January 24, 2021 12:07 PM
To: DXLab <dxlab@groups.io>
Subject: [DXLab] Commander and TS-590s

I see that Commander does not support a Kenwood TS-590s. Anyway to use DXLab with the 590s.

73, Pete, N4KW


Pete N4KW
 

Thanks Mike
Pete, N4KW

On 1/24/2021 1:12 PM, Mike, K9UW wrote:
Hi Pete,

The 590S works fine with DXLab. See https://www.dxlabsuite.com/dxlabwiki/TranceiverControlKenwood for the setup.

73,

Mike, K9UW
Amherst, WI

-----Original Message-----
From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Pete N4KW
Sent: Sunday, January 24, 2021 12:07 PM
To: DXLab <dxlab@groups.io>
Subject: [DXLab] Commander and TS-590s

I see that Commander does not support a Kenwood TS-590s. Anyway to use DXLab with the 590s.

73, Pete, N4KW













Dave AA6YQ
 

+ AA6YQ comments below

The 590S works fine with DXLab. See https://www.dxlabsuite.com/dxlabwiki/TranceiverControlKenwood for the setup.

+ The list of 141 supported transceivers is here:

https://www.dxlabsuite.com/commander/radios.htm

73,

Dave, AA6YQ