AB9M Recompute Actions Report


CSM\(r\) Gary Huber - AB9M
 

Several days ago it started. When I initiate a Check Progress, Recompute, an AB9M Recompute Actions Report is generated. 

I do not recall making a change to any DXLab Suite configuration or report generator. Where should I look to "uncheck" the box that causes this report?

73 ES DX,

Gary - AB9M


Dave AA6YQ
 

+ AA6YQ comments below
Several days ago it started. When I initiate a Check Progress, Recompute, an AB9M Recompute Actions Report is generated. 
 
I do not recall making a change to any DXLab Suite configuration or report generator. Where should I look to "uncheck" the box that causes this report?
+ DXKeeper's "Recompute"  function always displays a report of any corrections or additions it has made; this cannot be disabled.

      73,

           Dave, AA6YQ


CSM\(r\) Gary Huber - AB9M
 

Dave, the report shows only the following:
Call              Date              Band     Mode        DXCC ID  DXCC Entity                        Error, or Action
                      -  -                                        [none]                             Action: changed WPX from <missing> to
                      -  -                                        [none]                             Broken: invalid DXCC ID
                      -  -                                        [none]                             Broken: missing callsign
                      -  -                                        [none]                             Broken: invalid QSO_Begin
                      -  -                                        [none]                             Broken: missing Band
                      -  -                                        [none]                             Broken: missing Mode
                      -  -                                        [none]                             Broken: missing Station_Callsign
                      -  -                                        [none]                             Broken: missing myQTHID
                      -  -                                        [none]                             Broken: invalid callsign


From: DXLab@groups.io <DXLab@groups.io> on behalf of Dave AA6YQ <aa6yq@...>
Sent: Saturday, October 8, 2022 4:29 PM
To: DXLab@groups.io <DXLab@groups.io>
Subject: Re: [DXLab] AB9M Recompute Actions Report
 
+ AA6YQ comments below
Several days ago it started. When I initiate a Check Progress, Recompute, an AB9M Recompute Actions Report is generated. 
 
I do not recall making a change to any DXLab Suite configuration or report generator. Where should I look to "uncheck" the box that causes this report?
+ DXKeeper's "Recompute"  function always displays a report of any corrections or additions it has made; this cannot be disabled.

      73,

           Dave, AA6YQ


w6de
 

You have a bad QSO in your logbook.  That bad QSO should be already up and displayed in DXKeeper with those noted bad fields already blinking.  Fix the blinking errors or delete the QSO.

 

73,

Dave, w6de

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of CSM\(r\) Gary Huber - AB9M via groups.io
Sent: 8 October, 2022 22:10
To: DXLab@groups.io
Subject: Re: [DXLab] AB9M Recompute Actions Report

 

Dave, the report shows only the following:

Call              Date              Band     Mode        DXCC ID  DXCC Entity                        Error, or Action

                      -  -                                        [none]                             Action: changed WPX from <missing> to

                      -  -                                        [none]                             Broken: invalid DXCC ID

                      -  -                                        [none]                             Broken: missing callsign

                      -  -                                        [none]                             Broken: invalid QSO_Begin

                      -  -                                        [none]                             Broken: missing Band

                      -  -                                        [none]                             Broken: missing Mode

                      -  -                                        [none]                             Broken: missing Station_Callsign

                      -  -                                        [none]                             Broken: missing myQTHID

                      -  -                                        [none]                             Broken: invalid callsign

 


From: DXLab@groups.io <DXLab@groups.io> on behalf of Dave AA6YQ <aa6yq@...>
Sent: Saturday, October 8, 2022 4:29 PM
To: DXLab@groups.io <DXLab@groups.io>
Subject: Re: [DXLab] AB9M Recompute Actions Report

 

+ AA6YQ comments below

Several days ago it started. When I initiate a Check Progress, Recompute, an AB9M Recompute Actions Report is generated. 

 

I do not recall making a change to any DXLab Suite configuration or report generator. Where should I look to "uncheck" the box that causes this report?

+ DXKeeper's "Recompute"  function always displays a report of any corrections or additions it has made; this cannot be disabled.

      73,

           Dave, AA6YQ


Dave AA6YQ
 

+ AA6YQ comments below

Dave, the report shows only the following:
Call Date Band Mode DXCC ID DXCC Entity Error, or Action

- - [none] Action: changed WPX from
<missing> to
- - [none] Broken: invalid DXCC ID
- - [none] Broken: missing callsign
- - [none] Broken: invalid QSO_Begin
- - [none] Broken: missing Band
- - [none] Broken: missing Mode
- - [none] Broken: missing
Station_Callsign
- - [none] Broken: missing myQTHID
- - [none] Broken: invalid callsign

+ There's an empty QSO in your log. To find it, filter the Log Page Display with

CALL=''

+ (those are two single quotes).

+ Delete this empty QSO, and the Recompute function will stop reporting its presence.

73,

Dave, AA6YQ


CSM&#92;(r&#92;) Gary Huber - AB9M
 

Thank you Dave for your time and support.

Found the empty record, deleted it as instructed, and NO report!

73 & DX,
Gary ~ AB9M

From: DXLab@groups.io <DXLab@groups.io> on behalf of Dave AA6YQ <aa6yq@...>
Sent: Saturday, October 8, 2022 5:22 PM
To: DXLab@groups.io <DXLab@groups.io>
Subject: Re: [DXLab] AB9M Recompute Actions Report
 
+ AA6YQ comments below

Dave, the report shows only the following:
Call              Date              Band     Mode        DXCC ID  DXCC Entity                        Error, or Action

                      -  -                                        [none]                             Action: changed WPX from
<missing> to
                      -  -                                        [none]                             Broken: invalid DXCC ID
                      -  -                                        [none]                             Broken: missing callsign
                      -  -                                        [none]                             Broken: invalid QSO_Begin
                      -  -                                        [none]                             Broken: missing Band
                      -  -                                        [none]                             Broken: missing Mode
                      -  -                                        [none]                             Broken: missing
Station_Callsign
                      -  -                                        [none]                             Broken: missing myQTHID
                      -  -                                        [none]                             Broken: invalid callsign

+ There's an empty QSO in your log. To find it, filter the Log Page Display with

CALL=''

+ (those are two single quotes).

+ Delete this empty QSO, and the Recompute function will stop reporting its presence.

       73,

                Dave, AA6YQ