When clicking on a spot from the spectrum window, nothing gets populated in winwarbler, is that a setting I may have missed? 

+ AA6YQ comments below

When clicking on a spot from the spectrum window, nothing gets populated in winwarbler, is that a setting I may have missed?

+ WinWarbler does not display spots. It displays a waterfall showing signals within your receiver's passband.

+ With the "Operating Mode" panel set to PSK or RTTY, WinWarbler can decode PSK or RTTY signals you've selected by clicking on them in the waterfall display. You can populate items in WinWarbler's "QSO Info" panel with decoded information; see

https://www.dxlabsuite.com/winwarbler/Help/Logging.htm#Capturing%20Information%20from%20decoded%20data

73,

Dave, AA6YQ

sorry, I wasnt very clear, I am clicking on a spot displayed in the 7610 spectrum window display

+ AA6YQ comments below

When clicking on a spot from the spectrum window, nothing gets populated in winwarbler, is that a setting I may have missed?

+ Based on your previous post, I see that "spectrum window" refers to the Spectrum-Waterfall window that Commander can display when controlling an IC-7610. In the "DX Spots" panel on the Bandspread tab of Commander's Configuration window,

1. set the "Digital Mode Application" sub-panel to WinWarbler and, if WinWarbler is running, click this sub-panel's Connect button 

2. if you want double-clicking the callsign of a station operating in CW to convey information to WinWarbler, click the "CW mode" sub-panel's "CW via DMA" button

3. if you want double-clicking the callsign of a station operating in SSB to convey information to WinWarbler, check the "Phone modes" sub-panel's "SSB via DMA" box

+ The above settings are documented here:

https://www.dxlabsuite.com/commander/Help/Configuration.htm#DX_Spot_settings

       73,

             Dave, AA6YQ