Date
1 - 6 of 6
User Define Controls button
|
d_ziolkowski
Rein- Here is what I use for exactly that for an FT450. The commands for your radio may be different but the logic should work. the radio commands start with ' (apostrophe). the <wait> commands slow down the steps to give the tuner time to actually tune. Each <WAIT> equals the "command interval ms) on general tab of the General tab of Config menu. I have a control set up for each band, this one is for 15m
<QSY 21074>: <name:7>15m_Tun<LEDenabled:1>0<LEDcolor:3>Red<ButtonTextcolor:5>65535<ButtonSurfacecolor:8>10522490 <tooltip:25>15m ipo off, pamp on,tune <QSY 21074> preamp on-ipo off 'pa01; mode cw 'md03; pwr 20 wts 'pc020; <TRANSMIT> <wait> <wait> <wait> <wait> <wait> <RECEIVE> <wait> <wait> <wait> mode usb data 'md0c; <wait> <wait> pwr 75 watts 'pc075; <Slider 1,75> save this as a txt file, then open it in Commander as a user define control.(right click a button, then load the file) Hope that helps. Thanks Dan KC2STA On Sat, Jan 28, 2023 at 4:56 AM Rien Aarden <r1aarden@...> wrote: Good morning Can someone help me make a User Define Controls button? What I want to do I have a Yaesu FTdx101MD and a Palstar Automatic Tuner. I want to make a button that when I press that, a carrier of 5 watts goes out and after 1 to 2 seconds and then puts the set back to 75 watts CW, that's my standard here. I've been working for a while but can't get this done, maybe there are users of a Yaesu FT101 in the group who already have this working Thanks again and have a nice weekend greeting Rien, PA7RA --
Dan Ziolkowski KC2STA SKCC #4290T Ubuntu LINUX |
|
|
|
Dave AA6YQ
# more AA6YQ comments below
+ There is no way to delay a specified interval - like 2 seconds - between steps. Instead, design the sequence so that the first click reduces power and transmits carrier, and the second click stops transmitting, increases the power, and sets the mode to CW. There are many examples of this "two click" approach in the examples in this groups' Files area. # This example from Commander's Reference documentation illustrates how to construct a button that toggles between two actions: https://www.dxlabsuite.com/commander/Help/ExampleToggleCommand.jpg 73, Dave, AA6YQ |
|
|
|
Dave AA6YQ
+ AA6YQ comments below
Hi Joe, I can't make a button that makes the FTdx101MP go to 5 watts and then gives a carrier so that my external tuner tunes the antennas. And then go back to RX after 1 or 2 seconds and put the FTdx101MP back to 75 watts in CW Mode. + There is no way to delay a specified interval - like 2 seconds - between steps. Instead, design the sequence so that the first click reduces power and transmits carrier, and the second click stops transmitting, increases the power, and sets the mode to CW. There are many examples of this "two click" approach in the examples in this groups' Files area. 73, |
|
|
|
Hi Joe, I can't make a button that makes the FTdx101MP go to 5 watts and then gives a carrier so that my external tuner tunes the antennas. And then go back to RX after 1 or 2 seconds and put the FTdx101MP back to 75 watts in CW Mode.
I have made a buton that put the FTdx101MP go to 5 watts and than with a hand key tune the antenna. After tune i push the button to go to 75watts but i hope that this can be done wth one single click! Rien, PA7RA |
|
|
|
Joe Subich, W4TV
I've been working for a while but can't get this done,Specifically what is not working for you? 73, ... Joe, W4TV On 1/28/2023 4:56 AM, Rien Aarden wrote: Good morning Can someone help me make a User Define Controls button? What I want to do I have a Yaesu FTdx101MD and a Palstar Automatic Tuner. I want to make a button that when I press that, a carrier of 5 watts goes out and after 1 to 2 seconds and then puts the set back to 75 watts CW, that's my standard here. I've been working for a while but can't get this done, maybe there are users of a Yaesu FT101 in the group who already have this working Thanks again and have a nice weekend greeting Rien, PA7RA |
|
|
|
Good morning Can someone help me make a User Define Controls button? What I want to do I have a Yaesu FTdx101MD and a Palstar Automatic Tuner. I want to make a button that when I press that, a carrier of 5 watts goes out and after 1 to 2 seconds and then puts the set back to 75 watts CW, that's my standard here. I've been working for a while but can't get this done, maybe there are users of a Yaesu FT101 in the group who already have this working Thanks again and have a nice weekend greeting Rien, PA7RA
|
|
|