QSL Count


Dave AA6YQ
 

+ AA6YQ comments below

After sending this email was also trying to get the digital award correct.
Found that ARRL had listed a RTTY contact in Feb of 2010 as Bonaire rather than deleted Bonaire, Curacao. That was then the only
contact set to "V"
which would fail the date test. I set another PJ4 20M contact to "V" and all is good on your end of things. Now have to get ARRL
corrected!!

+ You might find the functionality described in this article to be helpful:

https://www.dxlabsuite.com/dxlabwiki/IdentifyDXCCCreditDiscrepancies

73,

Dave, AA6YQ


Jackson McNees
 

Thanks Dave,

After sending this email was also trying to get the digital award correct.
Found that ARRL had listed a RTTY contact in Feb of 2010 as Bonaire rather
than deleted Bonaire, Curacao. That was then the only contact set to "V"
which would fail the date test. I set another PJ4 20M contact to "V" and
all is good on your end of things. Now have to get ARRL corrected!!

Thanks as always for fantastic support!!

Jack, K4IJQ

-----Original Message-----
From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Dave AA6YQ
Sent: Friday, September 23, 2022 4:55 PM
To: DXLab@groups.io
Subject: Re: [DXLab] QSL Count

+ AA6QY comments below

Trying to get all my QSL counts to match between JtAlert, LoTW, DXLab, and
my graphical Excel spreadsheet.

Could not get 20M to come out correctly.

Found that although Bonaire, PJ4 has QSL Rcvd set to "V" in DXKeeper, when I
run the DXCC progress report, Bonaire shows "C" rather than "V".

That is the only one that is incorrect.

+ As you can see in Note 51 at the bottom of

http://www.arrl.org/files/file/DXCC/2022_DXCC_Current.pdf

+ Only QSOs made after 0400 UTC October 10, 2010 count towards Bonaire,
whose DXCC "country code" is 520.

+ What is the date of your 20m QSO with Bonaire? What DXCC "country code" is
logged with this QSO?

73,

Dave, AA6YQ


Dave AA6YQ
 

+ AA6QY comments below

Trying to get all my QSL counts to match between JtAlert, LoTW, DXLab, and my graphical Excel spreadsheet.

Could not get 20M to come out correctly.

Found that although Bonaire, PJ4 has QSL Rcvd set to "V" in DXKeeper, when I run the DXCC progress report, Bonaire shows "C" rather
than "V".

That is the only one that is incorrect.

+ As you can see in Note 51 at the bottom of

http://www.arrl.org/files/file/DXCC/2022_DXCC_Current.pdf

+ Only QSOs made after 0400 UTC October 10, 2010 count towards Bonaire, whose DXCC "country code" is 520.

+ What is the date of your 20m QSO with Bonaire? What DXCC "country code" is logged with this QSO?

73,

Dave, AA6YQ


Jackson McNees
 

Trying to get all my QSL counts to match between JtAlert, LoTW, DXLab, and
my graphical Excel spreadsheet.

Could not get 20M to come out correctly.

Found that although Bonaire, PJ4 has QSL Rcvd set to "V" in DXKeeper, when I
run the DXCC progress report, Bonaire shows "C" rather than "V".

That is the only one that is incorrect.

Jack, K4IJQ