Commander 15.3.0 is available


Dave AA6YQ
 

Hi dave after up grading to the latest version of commander

I have a problem



My config Is

Icom 756pro3

microham router

microband decoder

windows 10 pro i7



up to the upgrade all was fine very fast switching when I tune the dial or change band now very sluggish and take 30 seconds to
update

and wsjtx and jtdx will not connect



any thoughts I did roll back but now the error stays even on the previous version.

Here is the error log

+ As a first step, update your anti-malware and firewall to consider Commander 15.3.0 to be "safe".

73,

Dave, AA6YQ


vk3fz
 

Hi dave after up grading to the latest version of commander

I have a problem

 

My config Is

Icom 756pro3

microham router

microband decoder

windows 10 pro i7

 

up to the upgrade all was fine very fast switching when I tune the dial or change band now very sluggish and take 30 seconds to update

and wsjtx and jtdx will not connect

 

any thoughts I did roll back but now the error stays even on the previous version.

Here is the error log

 

022-01-21 23:02:23     > CI-V Commander version 15.3.0

2022-01-21 23:02:23     > App.Path          : C:\DXLab\Commander

2022-01-21 23:02:23     > App.exe           : CI-V Commander

2022-01-21 23:02:23     > Module            : C:\DXLab\Commander\CI-V Commander.exe

2022-01-21 23:02:23     > Operating System  : Windows 10 Enterprise (64-bit) build 22000

2022-01-21 23:02:23     > Locale ID         : 3081 (0xC09)

2022-01-21 23:02:23     > ANSI CodePage     : 1252

2022-01-21 23:02:23     > OEM CodePage      : 850

2022-01-21 23:02:23     > Country           : Australia

2022-01-21 23:02:23     > Language          : English

2022-01-21 23:02:23     > DecimalSeparator  : .

2022-01-21 23:02:23     > ThousandSeparator : ,

2022-01-21 23:02:23     > DXLab Apps        :

2022-01-21 23:02:42     > Monitors          : 3

2022-01-21 23:02:42     > Monitor 1

2022-01-21 23:02:42     >    width          : 1680

2022-01-21 23:02:42     >    height         : 1050

2022-01-21 23:02:42     >    dimensions     : (0, 0)-(1680, 1050)

2022-01-21 23:02:42     > Monitor 2

2022-01-21 23:02:42     >    width          : 1680

2022-01-21 23:02:42     >    height         : 1050

2022-01-21 23:02:42     >    dimensions     : (-3600, -96)-(-1920, 954)

2022-01-21 23:02:42     > Monitor 3

2022-01-21 23:02:42     >    width          : 1920

2022-01-21 23:02:42     >    height         : 1080

2022-01-21 23:02:42     >    dimensions     : (-1920, -151)-(0, 929)

2022-01-21 23:02:42.139 > Receive buffer overflow

                                                  

2022-01-21 23:17:44     > CI-V Commander version 15.3.0

2022-01-21 23:17:44     > App.Path          : C:\DXLab\Commander

2022-01-21 23:17:44     > App.exe           : CI-V Commander

2022-01-21 23:17:44     > Module            : C:\DXLab\Commander\CI-V Commander.exe

2022-01-21 23:17:44     > Operating System  : Windows 10 Enterprise (64-bit) build 22000

2022-01-21 23:17:44     > Locale ID         : 3081 (0xC09)

2022-01-21 23:17:44     > ANSI CodePage     : 1252

2022-01-21 23:17:44     > OEM CodePage      : 850

2022-01-21 23:17:44     > Country           : Australia

2022-01-21 23:17:44     > Language          : English

2022-01-21 23:17:44     > DecimalSeparator  : .

2022-01-21 23:17:44     > ThousandSeparator : ,

2022-01-21 23:17:44     > DXLab Apps        :

2022-01-21 23:17:59     > Monitors          : 3

2022-01-21 23:17:59     > Monitor 1

2022-01-21 23:17:59     >    width          : 1680

2022-01-21 23:17:59     >    height         : 1050

2022-01-21 23:17:59     >    dimensions     : (0, 0)-(1680, 1050)

2022-01-21 23:17:59     > Monitor 2

2022-01-21 23:17:59     >    width          : 1680

2022-01-21 23:17:59     >    height         : 1050

2022-01-21 23:17:59     >    dimensions     : (-3600, -96)-(-1920, 954)

2022-01-21 23:17:59     > Monitor 3

2022-01-21 23:17:59     >    width          : 1920

2022-01-21 23:17:59     >    height         : 1080

2022-01-21 23:17:59     >    dimensions     : (-1920, -151)-(0, 929)

2022-01-21 23:17:59.184 > Receive buffer overflow

2022-01-21 23:18:03.208 > Receive buffer overflow

2022-01-21 23:18:12.675 > Receive buffer overflow

2022-01-21 23:18:22.330 > Receive buffer overflow

2022-01-21 23:18:59.650 > Receive buffer overflow

2022-01-21 23:19:19.144 > Receive buffer overflow

2022-01-21 23:20:03.857 > Receive buffer overflow

2022-01-21 23:23:25.362 > Receive buffer overflow

2022-01-21 23:23:38.105 > Receive buffer overflow

2022-01-21 23:25:26.891 > Common.Terminate: CI-V Commander shutdown

2022-01-21 23:25:28.250 > program error -2147418105 in module CIVModule.SendCommand, theCommand = þþnàUw'P ý, RadioSupplier = I, State = 17: Automation error

The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed.

2022-01-21 23:25:28.263 > program error 13 in module CIVModule.ExecuteSetFreqCmd: Type mismatch

 

 

Many thanks

 

Roger vk3fz


Dave AA6YQ
 

If you are using Window Defender Antivirus (Windows 10), update it to its latest malware definition in

https://www.microsoft.com/en-us/wdsi/definitions

before installing or upgrading to Commander 15.3.0


This release

- when controlling an Icom radio, switching between memories that specify the same data mode directs the radio to use the selected
memory's filter (tnx to Fred WB4QOC)

- when controlling an FT2000 and directed to change both frequency an mode, issue a mode change command if the frequency change
requires a band change (tnx to Tom W2EQ)

- when controlling an FT2000 and setting VFO B's frequency and mode, repeat the set frequency command after setting the mode (tnx to
Tom W2EQ)

- when controlling an FT2000 correctly implements the "Set Split" directive received from SpotCollector when the Spot Database Entry
for a station working split is double-clicked (tnx to Tom W2EQ)

- if dual-track is enabled when a "Set frequency and mode" directive is received, sets both VFOs to the specified frequency (tnx to
Floyd K8AC)

- provides dual-track support when the primary transceiver is a Flex Signature

- directs the Waterfall Bandmap version 1.0.0.36 or later to track the Bandspread window's range (tnx to Steve N2IC)

- removes Secondary CAT Port support for the FlexRadio PGXL amplifier

- enables the optional inclusion of <Antenna>, <AuxAntSelected>, and <AuxAntSelectedName> tags in RadioInfo messages sent to active
UDP connections (tnx to Larry K8UT and Steve N2IC)

- provides commands that can be included in user-defined command sequences to enable/disable the inclusion of <Antenna>,
<AuxAntSelected>, and <AuxAntSelectedName> tags in RadioInfo messages set to active UDP connections and to issue a RadioInfo message
to active UDP connections (tnx to Larry K8UT)

- provides a button that when clicked sends a RadioInfo message to active UDP connections

- updates the ChangingFrequency.htm, CommandSequences.htm, Configuration.htm, and NetworkService.htm documentation files


Notes

1. Update your firewall and anti-malware applications to consider this new version of Commander to be "safe"

- 0 of 66 antivirus scanners accessible via Virus Total detected malware <https://www.virustotal.com/gui/home/upload>

- 0 of 13 antivirus scanners accessible via Jotti detected malware <https://virusscan.jotti.org/>

- submitted for online analysis by Microsoft Windows Defender: no malware detected


2. If this upgrade doesn't work correctly, see the "After an Upgrade" section of
http://www.dxlabsuite.com/dxlabwiki/ApplicationStoppedWorking


3. After upgrading, to revert to the previous version of Commander, see
http://www.dxlabsuite.com/dxlabwiki/RevertApplicationVersion


4. Waterfall Bandmap version 1.0.0.36 is available via

www.dxlabsuite.com/commander/WB_1.0.0.36.zip


Commander 15.3.0 is available via the DXLab Launcher and via

http://www.dxlabsuite.com/download.htm

73,

Dave, AA6YQ