Great Dave. I will try that.

73 es tnx de LA9RY Knut

Den 23.10.2020 00.28, skrev Dave AA6YQ:

# more AA6YQ comments below

+ On the Configuration window's CW tab, what option is selected in the Keying panel?

Serial port RTS port 4

* What's connected to COM4' s RTS signal?

USB Keying (CW) and

USB Keying (RTTY)

USB Send is connected to DTR

according to the setup in my IC-7300

# Thanks. That configuration produces the least reliable CW timing, as it relies on Windows, which is not a realtime operating system.

# Assuming you have Commander running, set WinWarbler's CW Keying panel to "Xcvr Ctrl App". Then WinWarbler will send CW by directing Commander to send CI-V commands to your IC-7300, which will generate CW with rock-solid timing.


73,

Dave, AA6YQ

* more AA6YQ comments below

+ On the Configuration window's CW tab, what option is selected in the Keying panel?

Serial port RTS port 4

* What's connected to COM4' s RTS signal?

USB Keying (CW) and

USB Keying (RTTY)

USB Send is connected to DTR

according to the setup in my IC-7300

       73,

               Dave, AA6YQ

* more AA6YQ comments below

+ On the Configuration window's CW tab, what option is selected in the Keying panel?

Serial port RTS port 4

* What's connected to COM4' s RTS signal?

       73,

               Dave, AA6YQ

+ AA6YQ comments below

Using Winwarbler for keyboard CW keying I experience that my 20WPM speed suddenly changes to more than 100WPM. 
Ii usually happens when i have some words in the type adhead buffer. 
It happens when I work with 100W output as well as with 5W. 

+ On the Configuration window's CW tab, what option is selected in the Keying panel?

Serial port RTS port 4

+ What make and model transceiver are you using?

IC-7300 with one USB cable connection to the PC, using VSPE port splitting.

Is this a common problem?

+ You are the first to report it in the last ~18 years.

          73,

                 Dave, AA6YQ

+ AA6YQ comments below

Using Winwarbler for keyboard CW keying I experience that my 20WPM speed suddenly changes to more than 100WPM. 
Ii usually happens when i have some words in the type adhead buffer. 
It happens when I work with 100W output as well as with 5W. 

+ On the Configuration window's CW tab, what option is selected in the Keying panel?

+ What make and model transceiver are you using?

Is this a common problem?

+ You are the first to report it in the last ~18 years.

          73,

                 Dave, AA6YQ

Using Winwarbler for keyboard CW keying I experience that my 20WPM speed suddenly changes to more than 100WPM. 
Ii usually happens when i have some words in the type adhead buffer. 
It happens when I work with 100W output as well as with 5W. 
Is this a common problem?
How can I fix it?
All ideas welcome..
73 de LA9RY Knut