AA6YQ comments below

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]
Sent: Tuesday, January 02, 2018 3:57 PM
To: dxlab@...
Subject: [dxlab] myQTH

When I upload an adi file to DXLab’s DX Keeper the location for myQTH is blank and is sending a painful bell to remind me to add the location.

Is there a way to default this setting? In my case I am only using DXLab at the home QTH.

Yes: in the "Log Settings" panel on the Configuration window's Log tab, set the "default myQTH ID" selector to Gallup.

Or is there a way to enter the QTH [which in my case I list as GALLUP, as I live in Gallup, NM] in a fashion for all entries?

You can do this with the "Advanced Sorts, Filters, and Modifiers" window's "Modify QSOs" panel, but if you specify a default myQTH as described above, that won't be necessary.

73,

Dave, AA6YQ

Yes there is.
Use the config button in DXKeeper.  Then click on myQTHs tab.
Toward the lower left, you'll see a New button.  Click on it and fill out the information in the boxes on top. 
The QTH should appear in the Grid on the bottom.  I just call mine HOME.
Now select that QTH under Find myQTH ID and click on the Set myQTH ID button.

I think that is it.
73.
Carl - WC4H