DX Keeper- edit US state


Stephen Rabinowitz
 

The station I worked has a home QTH in KS and is shown as such in DX Keeper, but he was in OK when we had our QSO.  The paper QSL he sent me shows OK.  I tried to do an override in DX View, but that doesn't come through into DX Keeper.  How do I edit for his correct QTH?
73, Steve WA2DFP


Sent via the Samsung Galaxy Note® II, an AT&T 4G LTE smartphone



-------- Original message --------
From: scolit@...
Date: 12/11/2013 5:16 PM (GMT-05:00)
To: dxlab@...
Subject: [dxlab] RE: CQ DX Marathon Progress Report


 

Dave,

The only thing that wasn't checked was "Include QSOs with no prop" and reran it and it works now. And, I better get a life because it says I had 201 countries and 37 zones worked.

Thanks Dave and everyone else for the replies.

Scott


Dave AA6YQ
 

AA6YQ comments below
From: dxlab@... [mailto:dxlab@...] On Behalf Of Stephen Rabinowitz MD
Sent: Wednesday, December 11, 2013 5:31 PM
To: dxlab@...
Subject: [dxlab] DX Keeper- edit US state

The station I worked has a home QTH in KS and is shown as such in DX Keeper, but he was in OK when we had our QSO. The paper QSL he sent me shows OK. I tried to do an override in DX View, but that doesn't come through into DX Keeper. How do I edit for his correct QTH?

An override would impact new QSOs that you log or import, but would have no effect on an already-logged QSO.
To modify a logged QSO's state,
1. On the Configuration window's Log tab, check the "Log Panels" panel's Award checkbox

2. the Main window's "Log QSOs" tab,

2a. In the Filter panel at the bottom of the tab, type the station's callsign into the Filter panel textbox, and click the Call button.

2b. If there is more than one entry in the Log Page Display because you have multiple QSOs with the station in question, click on entry associated with the OK QSO

2c. In the Award panel, change the State selector from KS to OK (if you have the "Require Edit to modify logged QSOs" option enabled, you'll need to click the Edit button above the Log Page Display before you can make this change"

2d. click the Save button

73,

Dave, AA6YQ


Stephen Rabinowitz
 

Your advice worked like a charm, Dave.  Many thanks.
73, Steve WA2DFP


Sent via the Samsung Galaxy Note® II, an AT&T 4G LTE smartphone



-------- Original message --------
From: Dave AA6YQ <aa6yq@...>
Date: 12/11/2013 5:42 PM (GMT-05:00)
To: dxlab@...
Subject: RE: [dxlab] DX Keeper- edit US state


 

>>>AA6YQ comments below

From: dxlab@... [mailto:dxlab@...] On Behalf Of Stephen Rabinowitz MD
Sent: Wednesday, December 11, 2013 5:31 PM
To: dxlab@...
Subject: [dxlab] DX Keeper- edit US state

The station I worked has a home QTH in KS and is shown as such in DX Keeper, but he was in OK when we had our QSO. The paper QSL he sent me shows OK. I tried to do an override in DX View, but that doesn't come through into DX Keeper. How do I edit for his correct QTH?

>>>An override would impact new QSOs that you log or import, but would have no effect on an already-logged QSO.

>>>To modify a logged QSO's state,

1. On the Configuration window's Log tab, check the "Log Panels" panel's Award checkbox

2. the Main window's "Log QSOs" tab,

2a. In the Filter panel at the bottom of the tab, type the station's callsign into the Filter panel textbox, and click the Call button.

2b. If there is more than one entry in the Log Page Display because you have multiple QSOs with the station in question, click on entry associated with the OK QSO

2c. In the Award panel, change the State selector from KS to OK (if you have the "Require Edit to modify logged QSOs" option enabled, you'll need to click the Edit button above the Log Page Display before you can make this change"

2d. click the Save button

73,

Dave, AA6YQ