Dave, I just got to the unlink from the remote and everything tracks beautifully. I found the waterfall with help from your link and it is displaying. So far everything is working well, my wsjt on FT8

Dave, I had 2 radios configured when I switched to the other radio and back everything started working, don't know why. I upped the baud rate to the max 19.2. 19.2 is as fastest baud rate available on

I just received my new 7610 today. I transferred over all my cables from the 7600 and connected my computer to USB1 after I installed the 64 bit USB drivers. I noticed in the USB drivers there were 2,

That is puzzling since the windows is a new copy of windows 10 installed but I will check. I misspoke on Pathfinder causing the errors. Richard, KC8RP

I noticed on my friends computer that when he logs a contact with WSJT & JTAlert that the Awards area in Keeper does not populate completely. The grid square populates but the ARRL, State and county d

I figured out the problem. For some reason when Pathfinder started it would cause script errors and somehow they caused the top tool bar buttons to disappear. I clicked on stop and the buttons reappea

I have a a fellow ham who has a quirky problem with Pathfinder. When pathfinder is launched the top tool bar appears and than quickly disappears. Once going there is no way to access any of the databa

I was trying to think back to when I transitioned from HRD to DXLab but memory fails me but it has been years. Once I got through the learning curve I never looked back and have been an advocate to an

Dave, Solved the problem, all is working like I expected it to. I will connect it to my amp tomorrow and as we use to say in the Army, give it the smoke test:) Richard, KC8RP

I received the USB cable today and connected the Palstar HF-Auto to my computer. I loaded W1TR's software and setup DXLab Commander as you suggested. The tuner follows the IC-7600 very well, I have no

Dave, I will have my cable tomorrow and will connect everything up using your recommended settings, I will post my results as soon as I have them. Richard, KC8RP

I have a Palstar HF-Auto 1500 tuner connected to my Expert amp and Icom 7600. I have the amp in bypass mode from the internal tuner and use the Palstar for my tuning needs. My inquiry is about the tun

Dave, Is there anything else I need to do? I added Primary but the column remains blank. I restarted SC but still no info in the Primary column. 73 Richard, KC8RP

Dave, Thanks That solved the problem, everything seems to be back to normal. I now backup workspace on 2 different drives and in the cloud, I will not be caught without backup again. I have a differen

Dave, I also notice that I get a message box that displaying message capture has been disabled I never saw that before this installation. Richard, KC8RP

Dave, I lost the drive with the workspace on it, maybe next time I can save it ob a USB memory stick. Richard, KC8RP

I have commander running on my new install of Windows 10 64 bit. It works well with my IC-7600 but when I go to multi radio to add a second radio, my KX3, the enable is greyed out on both. Everything

Got it, worked like a charm. I set the time zone initially but never looked back at. Thanks Richard, KC8RP

I just had to rebuild my system, installed a new motherboard, processor and memory. I am using Intel i7 processor with Windows 10 64 bit 16 megs of memory, except for motherboard the same as the old s

I noticed, just recently, that the SC Lock on DXView does not hold the spot selected in the spot collector like it did for me in the past, has the function changed? Thanks Richard, KC8RP