Dave, It is not that WW is not satisfactorily functioning, it is more my inputs have not satisfied WW's requirements. We have exchanged emails before on this subject - what is not satisfying is I have

This is addressed to those DXLAB / WinWarbler users with the IC7851 radio. I am looking for the radio setup to interface with the PC running WinWarbler for the SSB, Digital (RTTY), and CW. modes. My s

A fellow user of DXLab has asked me a "why does this happen" question regarding his DXLab setup. The question was related to what is the linkage between SC reporting and DXView display. In his case, D

An Alternative Solution - Many of us who had years of paper logs filled before adopting Computer Logging and have had to address this problem of transcription. There are some who want to transcribe ev

I am an owner of now my second ACOM 2000A amplifier. The primary difference in the OLD version (circa '07) and my later unit from 2013 is the RCU (Remote Control Unit). Most significant addition to th

Have you "Pruned" you SC database? Check Config, and Size Control See attached image of my setting Norm W4QN

if you entered the QSO into DXKeeper via Capture at the time of making the contact there should be no reason why the date did not track. But if you did a manual or direct entry later into DXKeeper the

I have a puzzling Spot Collector issue, it does not show any spots of the current DX pedition from HU1DL, I have worked them and sent a spot, and it does not appear, but does show up in one of my Spot

A never before issue has cropped up - Using the 'Add Requested' function on the QSL window no longer generates a list of recently worked QSOs. I can upload those QSOs from the main log view using the

Thanks for response Dave- I am aware and use the submission provision for exporting into the CQ Marathon spread sheet. You may have missed my key question - -- I need a consistent date format in EXCEL

My date format for logging (DXK) is conventional for the USA, MM/DD/YYYY . In DXK config, REPORTS tab I have selected the English choice dd-mmm-yyyy, and that is the date format when generating a Repo

I have two questions regarding the use of the NEED Filter button on Spot Collector. The 'Tool Tip' states that two filter conditions are selectable.. Click to find Spots for 'Needed DXCC entities-band

Question is - Why isn't the Zone requirement satisfied when working an entity that is obviously in the Zone? Checking Marathon Realtime progress shows both the entity and the zone as being worked 'W'

You have it correct, select the date range in the UTC Filter panel, then at the bottom of ADV Window Modify QSOs panel set the MYQTHID as Item, then select correct QTH value and hit MOD All good Norm

This is more of a "How Come" query regarding the info posted in the SC NEED column. As I am pursuing CQ Marathon (again) I am expecting to see a 'M" or 'MN' in that column for unworked entities. That

Dave, I would like to try it - Norm W4QN

Comment- The exchange regarding Risk evaluation of Countries and Zones was one I missed in the past - I do not often have the Award Panel open. However it appears that the Risk value must be manually

Dave, I am experiencing an instability and Azimuth error when selecting the call D4X in SC. The error shows up in both DXView, and in the beam track shown in DXAtlas. If I select the errant call D4X o

Dave, I am finally straight on this and I think I understand why I was having this problem. I agree that Begin Time is the correct value to be logged, But that was not happening as my operating proced

Dave, ==== key issue ======= I do not fill in the RST Report until received, and if entering those data also set the END TIME, I believe that would solve my problem. =========== I have restated above