As I went through the FLEX 6600 / DXLab install process with SmartSDR and Windows 10, I had the same issue. Once I settled on SmartSDR v3.0.19 I found I could not make FT-8 transmissions if I was runn

If you've had a windows update, you probably have the com ports corrupted. You may need to download com_name_arbiter.zip then extract, install, run, reboot and WSJT-X will be able to PTT the 6600. If

I'm running WIN 10 PRO with 16 GB and find that WIN 10 likes to collect "cookies". Also running the FLEX 6600 and DX Lab Suite, CWSkimmer and other applications. I've found that cleaning the browser h

That symptom may be solved by checking your computer's sound settings. Either the wrong sound card, sampling rate, or level is most likely the problem. 73, Gary~AB9M Get Outlook for Android 73, Gary ~

Thanks Jeff. I have been having the WXJT-X and Winwarbler issues you stated below. I just downloaded SmartSDR 2.4.9 and will give it a go shortly. I am mostly interested in DX and do contesting mostly

I purchased a Visalia promotion Flex 6600 and Maestro and took delivery on it this past Wed. It came with SmartSDR v 3.0.x which is of course not fully compatible with DXLab Suite. I am looking for he

Been building a new W10 computer and have moved DXLab to it but cannot stay logged into QRZ..com when using Pathfinder automation. most recent error log is attached. Thanks in advance for suggestions,

Good morning Dave, As I have been mostly out of the email loop, for several weeks, I missed this until this morning. Like others I have resisted the move to WIN 10, and have a number of friends using

Dale, click on the MSGS button on the main Commander panel, then check the capture and display box in the upper left corner of Commander messages box. Uncheck continuous interrogation at the center bo

JTAlert at Hamapps.com Sent via the Samsung Galaxy Tab® 3 Lite -------- Original message -------- From: "nz3301@yahoo.com [dxlab]" Date:01/12/2018 11:53 AM (GMT-06:00) To: dxlab@yahoogroups.com Subjec

I start my Flex 1500 before starting DDUtil 3.2.6.00 then I start DXLab Suite. See: http://www.dxlabsuite.com/dxlabwiki/DDUtilPowerSDRN1MMSkimmerCommander DDUtilPowerSDRN1MMSkimmerCommander - DX Lab S

Wait, it gets better..... after re-reading the User Manual for the MotherBoard of the computer that I assembled, I realized that I needed to change a BIOS setting from Auto to Enable so that the on bo

Thanks Joe. I do have an USB sound card that I could use for digital modes. Since DXLab Suite uses IE or portions of it, disabling the "play sounds in webpages" seems to be a quick fix. 73, Gary ~ AB9

I was on 40 meter FT8 last night working a EA5 when all of a sudden my transmitted signal increased dramatically at syllabic rate and voice sounds started from my sound card speaker. It turns out the

Welcome Bill, As a long time user of DXLab Suite, I could probably get you going, but given that Dave - AA6YQ normally responds within 24 hours and is the author of DXLab Suite and has helped so many

### AB9M comments below From: dxlab@yahoogroups.com on behalf of 'Dave AA6YQ' aa6yq@ambersoft.com [dxlab] Sent: Saturday, August 12, 2017 2:46 PM To: dxlab@yahoogroups.com Subject: RE: [dxlab] DXKeepe

Good morning Dave, After editing and changing the power level for all the JT-65 and FT8 QSOs in my DXKeeper, I am wondering if there are any plans to change to change the "Default Power by mode" panel

I ran into the same problem... I found I had to shut down apps in the reverse order I loaded them and the problem went away. But WXJT-X is doing something on exit to the loaded comm ports which does c

Laurie, thanks for your efforts with JT-Alert 2.10.0. I found I only needed WSJT-X JT-Alert and JTDX JT-Alert. RTFM seems to be required if one wants the correct apps and no un-necessary links on the

Thanks Laurie, I did the download, but it was shown as 2.10.0. I hope that is the very latest as it was dated 7/21/17 and that would be correct for local time on your side of the Date Line. I will be