I spoke too soon. with menu item in Auto, if I select 'CW' mode in Commander and with the rig set to CW LSB, the Commander Mode stays on 'CW; for less than a second before it reverts to CW-R. As befor

Thanks, Joe. I missed that when I "thought" I checked the menu items. 73, Steve W1LV

Commander tracks frequency and mode, expect that it shows 'CW' when the rig shows 'CW USB' on 40 meters. Similar results on other bands. Reversing the mode on the rig shows 'CW-R' when the rig shows '

I believe I have the USB Interface II and DxLab working together. One of the programs had the baud rate at 9600, where the IC-10 kit in the TS-440S needs 4800. I was a little concerned with having RTS

Hi Dave, Let me look again for the radio settings for baud rate, parity, word length, and stop bits that match your radio's settings. I'm not sure what to make of this: set the RTS selector to On unle

Joe, I have DTR Off (there is not an option for None,) and the RTS choices are Off, On, Tx and Flow. Should I use Tx?

I do not think I do, as there seems to be disagreement in the suggestions in the MicroHam setup for N1MM+ vs DxLabSuite. Currently in Commander config, Port 5, 4800, 8, N, 2 stop bits, DTR Off, RTS On

MicroHAM USB Interface II is operating correctly, but Commander does not reflect the radio frequency, or anything else. Any suggestions? Thanks, Steve W1LV Here is part of the error log: 2020-06-15 13