Two instances of WJST on single PC driving K4. I'll only use this on 6m for the time being to work when big EU opening occurs. Spill over from 313 to 323 happens then. First instance uses Commander. C

Can a second instance of WSJT properly invoked and using the right audio channel use Commander as the rig? I'd like to have two instances of WSJT monitoring and decoding 50313 and 50.323 at the same t

TLDR VERSION: removing latest Win11 update restored reliable performance. Commander and SC along with WSJT have now run for 16 hours continuously with no errors. Prior to this they would only run for

And I did check the TCP settings and ensure that Windows Firewall was open for not only SC-WSJT but also WSJT.exe. My solution of running two separate com ports won't likely work for many others. The

All settings are per defaults and have worked for several years now first on the K3s and now on the K4. Firewalls and virus settings are as they always have been. This does work for a while but fails

Failed again with remote host closed message at 1442z Note that when it's working it works fine. JTAlert is NOT used here and is NOT on the PC. Microsoft Defender is the only firewall/virus protection

WSJT closed and restarted at 1430z with Commander as the radio. All functioning for now and responsive to VFOA. Jim ab3cv

After restarting at 1337z the rig control error occurred again. This time details are: DX Lab Suite Commander send command "<command: 10>CmdGetFreq<parameters:0>" read reply failed: The remote host cl

It is an error message box with a red X Rig Control Error Do you want to reconfigure the radio interface? Options are OK, Retry, Configurations, Show Details, Cancel Details yields: DX Lab Suite Comma

Since running the latest Win11 update WSJT 2.5.4 has trouble remaining connected to Commander and issues a Rig Control Error message. Things I've tried: Moving from IP cat control to Com3 on Commander

Updating Bandmodes.txt got the nice result expected. However I checked the date on the bandmodes.txt I was previously using and it was from 6/11/2005! Since it doesn't get automatically replaced make

It does populate the specified fields but Commander freq and WSJT Band/freq are not changed. For example I'm listening for new ones on 6m FT8 the a spot comes up in SC showing something in 10m FT8. Do

Hi Dave I don't use JTAlert. Just DXLabs directly thru gateway to WSJT. All latest updates. 73 jim ab3cv

If i double click on a spot in SC should the gateway to WSJT cause WSJT to follow to the spotted band? 73 jim ab3cv

I normally use 11pt Consolas and I see that affects the Prop condition column as well. But it appears to be plenty of room to widen that column without messing anything else up. Perhaps it could be wi

I just looked at the Propagation panel in DXK (16.5.1) and saw that SFI is recorded but the 135 value can't be fully displayed as the Condition column is too narrow. Is this something I've done? 73 ji

All good! 73 jim ab3cv

When I do any lookup on QRZ via pathfinder there is a considerable white space area at the top of the window. Right now if you look at AB3CV for instance the whitespace is about the height of the "I u

I look to propview to see what might happen (or has happened) in its 24hr window. It has been quite useful that way. I usually keep at least 2 days of SC database unless there's a contest madly genera

Dave Took a look and frankly it's beyond me. Much more complicated than I thought. I'll stick to chasing spots and "now-casting" rather than forecasting. 73 jim ab3cv