Win4K3 and LPBridge both consume approaching 5% of the CPU capacity. That is a significant amount if their only function is to provide an intelligent splitter. VSPE's consumption is below 0.5%. CW ski

So far this works. I downloaded VSPE trial version. Eterlogic - VSPE: tool for serial ports emulation The K3 was set for Port 4 at 38400 Baud Rate In VSPE, I set up a Splitter. The input was Port 4. T

I have been running DXL Commander, CW Skimmer and Nap3 simultaneously using a third party virtual port facility like LPBridge or Win4K3. Each of those facilities are CPU consumers. Commander has the f

There are numerous times where DX Lab posts a warning or question in a small box that is typically located in the dead center of the monitor. Call book look up errors. Notices about overwriting entrie

Assuming I have ten thousand qsos in the log. When I am in "ascending" display the number in the box at the top shows 10,000 and the cursor on the left is at the most recent qso on the bottom of the d

Above the log display is the total number of QSOs in a box. There are arrows on both sides. When I am in Descending order and get the "one" with the filter, if I hit the outside "go to end" arrow, I g

I used your filter, Art, but same results. 70 qsos in the Ascending display, 1 in the Descending display. The only think I do is hit the Ascending or descending button under the Chronological Sort Ord

This filter QSO_Begin >= #2021-01-01# Works in Ascending Order, I get 70 QSOs listed Does not work in Descending Order, I get One QSO listed (whoever was last) Don WB6BEE

I apologize for the misuse of the terms "filter" versus "sort". Those terms are not synonymous in Excel either. Iain asked How are you changing direction? The right way is in the "Chronological Sort O

I need to digest all this. But, for explanation purposes, I have several similar filters. The all worked with Log page in Ascending order. Only thing I changed was go to Descending order so the most c

I have a filter that sorts for QSO in 2021. Filter looks like this. DateDiff ("n", QSO_BEGIN,QSO_END)>0 and QSO_Begin > #2021-01-01 00:00# It only works if the log page display is in ascending order.

I have FOC members loaded. I have DXCC needed loaded. I have FOC members that I have not worked yet loaded. Three different subsets of special call signs. They all show "pink" in then Commander spectr

You can load various sets of Call signs into spot collector-special call signs. Stations to avoid, Stations you need for an Award or stations in your favorite club or organization. Just various files

Direct Acceptance by Band is checked on all bands Report computed ..... Checked DXK Default to "S" not checked, but checked it I see no change. I logged a fake QSO with JA1NUT. Direction 311 degrees.

Dave Tell me what I am supposed to see. At this point, I can put ten different call signs in the call box. I can hit look up. I get all the stations information in the capture window (but) the SP and

This is not working for me " There's a "Report computed short path heading when disabled or on unsupported band" option on the "Rotator Control" tab of DXView's Configuration window that if enabled ca

In the Capture window, the "az" field shows the current azimuth setting on the rotor. Next to that is a drop down menu that has "S", "L", "G" and "O". Not sure what the "O" stands for, but the others

Pathfinder displays the QRZ.com pages for stations. Some pages are lengthy. I have more than enough vertical space on that monitor ( I have five running). However, Pathfinder won't expand vertically b

Chuck DXKeeper Configuration General Tab, Show prior comments on look up Don WB6BEE

You also need to ensure the Capture window is large enough to show the "comments" field. Don WB6BEE