Rein- Here is what I use for exactly that for an FT450. The commands for your radio may be different but the logic should work. the radio commands start with ' (apostrophe). the <wait> commands slow d

Eric- Get another modem from your ISP. Or buy a modem and use that instead. I used to work for an ISP. All the techs said the company supplied modems were junk. That would be expected as they give it

#technicalhelpquestion

+ If you're running DXLab, what purpose is GridTracker serving other than consuming resources on your Linux system? it performs the functions of JTAlert to indicate needed DX, state, grid etc. I keep

#technicalhelpquestion

Dave- Grid Tracker can send WJTX QSOs to DX Keeper. You can also select other loggers. I sometimes run WSJTX on a Linux machine, as well as a Win/DXLabs setup. I use Grid Tracker on Linux (JT Alert is

#technicalhelpquestion

Dave- yes one was checked, unchecked, and now saved. Thanks Dan KC2STA

I updated workspace with same results. DAN KC2STA

Dave- in Commander 15.5.0, I noticed an issue. under config/General/command interval(ms) when I enter a number here such as 300, the number does not save upon closing Commander. Therefore Interval is

Dave , thanks for taking the time to explain this to me. Dan kc2sta

Dave- I tried this again, this time I used your sample qso verbatim, and it worked. But I don't understand the count of externallog<parameters:341><ExternalLogADIF:187>, what is included in those coun

Dave- i sent the error log. When I said I sent your sample qso, I should have noted i only sent up the grid sq, I did not send <UploadeQSL:1>Y<UploadLoTW:1>Y<UploadClubLog:1>Y<DeduceMissing:1>Y<QueryC

Dave- I tried out logging from my Linux to DXKeeper. I used your example QSO from http://www.dxlabsuite.com/Interoperation.htm, I just changed the callsign to KC2STA. Linux send this: nc -v 192.168.1.

Marv- I do that now. My Primary PC is WIN10/DXLabs. My secondary PC is Ubuntu 18.04. Using Grid Tracker on the Ubuntu PC, I can send QSO's from WSJTx to DXKeeper via GridTracker. On the Ubuntu PC, For

Roland- here's one thing to make sure is checked: on the QSL page: QSL config/general/options/confirm multiple qsos per qsl On the QSL this will print one card with multiple qsos for the same call. DA

Dave- So as I thought, the single radio control sequences are stored in the registry. thanks for the info Dan KC2STA

Dave- I had the same issue when I upgraded Commander to 15.4.4. After the update, a control sequences file did load, but it was not the same control sequences that were present before the update. The

Greg- just stop grid tracker from uploading them, just have DXLabs do the upload. See the Grid Tracker logging set up page. Dan KC2STA

Hi Dave- SC 9.0.8. Win10 In the past week, several times SC after running for several hours has a problem. SC attempt's "compacting spots database" but an error pops up I will email you direct the scr

Dave- Earlier today in WSJTX/JTAlert I activated the UDP function. 224.0.0.1 port 2237 loopback 0 I am wondering if I need to change to activated UDP in commander. Now it is set for TCP. Everything se

Scott- anyone could create a fake card, if you were desperate enough. Certainly not ham spirit. I have also received several of these emailed qsls. But nothing I needed a QSL for. I don't think eqsl p

if you can print it why would it not be valid for awards? Dan KC2STA