Nothing at all wrong with a clean install, but I wouldn't agree that it's the best thing to do. My Win 10 system started out as a Win 7 system years ago and I've done nothing but upgrades to the syste

Yes - works just fine. It would be perfect if Commander would only pass the RIT reset command through to the connected transceiver via the secondary CAT port. Any chance of that?

I'm using VSP Manager from K5FR. If you're a licensed ham, k5FR will send you a free copy. You could also use VSPE and there are a couple of others as well.

Hi Chris. I run the two together with no problems. I first set up a pair of virtual com ports to provide a path between N1MM and DXLab Commander. In my case, the pair is COM14 and COM15. COM14 is defi

With Dave's guidance, this has been resolved. The problem was traced to the fact that I had inadvertently requested DXLab to track zones worked in Digi modes for WAZ. If you have this problem, you can

I've set up Spotcollector to work with WSJT-X using the detailed instructions provided by DXLab. I believe all options have been selected per the instructions. On SpotCollector main screen, I have AGE

Yes, they can be displayed on the Maestro, as long as there are not many spots. During periods of heavy spot activity, such as a DX contest, the "stuttering" can become severe with complete freeze-up

OK - think the problem is resolved. In the move from AFSK back to FSK, I checked the wrong radio button in MMTTY setup, Misc Tab, TX Port section. Sound + Com-TxD(FSK) was selected instead of Com-TxD(

Looks like the screen capture didn't keep. Mode is RTS+DTR and port is COM8.

New Yaesu FTDX-5000, latest firmware. Com8 is a virtual port created by microHam Digikeyer II router (Eltima for virtual ports)

Haven't run Winwarbler for quite a while on RTTY and now am having a problem I can't resolve. I'm using MMTTY and FSK and all is working well except there's a full four second delay when returning to

I am accessing my FTDX-5000 via the primary CAT port of Commander. N1MM Logger+ connects to the 5000 via the secondary CAT port of Commander. That link is defined at each end as Kenwood, 4800, and I h

Running OK now. I had the Flex set up as a Kenwood (recommendation from the documentation somewhere) and when you do that, you don't get the box in the Bandspread tab of SpotCollector config that caus

New Flex owner here, trying to get the DX spots appearing on the panadapter on the Maestro. Running 2.4.9 of SmartSDR. Haven't been able to locate the steps necessary for spots to display, but have Sp

By the way, the latest version of NaP3 is 5.6.0, probably available from the Telepost website.

It's been a couple of years since I used Commander to interface to NaP3, so I may not be remembering correctly. I think the problem was maybe with the VFO-B update period. I recall that it was very sl

I use NaP3 and have for many years. It's clearly the best panadaptor solution for supported devices. I seldom use the callsign display because there's presently no way to filter the calls. It would be

OK - just discovered what I missed - have to hit the 6M button in Commander bandspread window. I suggest that be added to the online help for Commander where it describes the Transverter option.

Running Commander 13.6.5, using FTV-1000 6 meter transverter with my FT-1000MP Mk V transceiver. Commander is configured with 6M transverter enabled, 22000 offset and + offset. I expected to see the 6

Good move, Dave. Thanks. 73, Floyd - K8AC