Dave, Ok on , that. Well it seems in either case Device manager is a useful tool to see ; Real DB9 serial ports if known directly connected, such as above, of which there are usually few, numbered low

I was wondering if Jim has used device manager to identify the CAT comports ?

Thanks Joe, I appreciate the reply and clarification.

Does this mean that the mark/space afsk generated tones were reverse to the ssb choice used on the radio ?

Jim, Can you let us know the actual setting parameter descriptions please in regard to below ?

Dave AA6YQ, Just a question please, on Commander 2nd CAT protocol and selection features, I refer to the 'Flexradio' 2nd CAT profile selection for use with the SPE amplifier; Does commander support th

Dave, Thankyou again for this great program, Playing with Commander and the secondary CAT connection for the KX3 cat line to SPE, which was com 9, … I went into advanced comport setting in device mana

Thanks Jamie, but I don't think I need any hardware. Before I discovered Commander was great for the 101MP<>SPE SUB freq tracking, I had been assisting Franco HB9OAB in his developing a windows progra

Dave, OK on that, I thought you must have something different. I get that you don't think a 1 -4 2nd CAT selection linked to the radio list is necessary, but hopefully in the future you may look at ad

Dave, not sure if they vary in design but with the 1.5KFA when you switch to 2nd txcr input, the required CAT connection shifts to the 2nd CAT connector also, which I have setup to PC, and it is on a

Dave, I use a SPE amp > PC connected to Commander 2nd cat following a FTDX101MP (radio 1), and a KX3 (radio 2), also connected to the SPE in the same way, on a 2nd cat connection. On Commander I can s

Thanks very much Joe and Dave. I had enabled the MMTTY Engine with which the extfsk64 gui had no port setup etc,, , just assumed it was needed... Once I disabled that, the rest of my setup was already

Dave, I played some more, and see extFSK64 and MMTTY Engine is supported, and config settings, but I cannot get it to FSK key. I see the shift activity in the Engine screen, but it is not fsk keying r

Dave the FTDX101MP ( I use) works fine with MMTTY with extFSK64 via RTS, with DTR ptt on the standard CP2105 comport (no soundcard afsk involved) (enhanced CP2105 comport used for CAT). Is this possib

Also I set the 2nd cwget backup, and winwarbler is monitoring both ok, showing both > sent (iambic paddle) and rx print. So the CWGtoWW localhost port used is sharing traffic from more than one progra

I thought about it before, and was thinking 'permissions' ? Executed the exe direct as admin and sure enough it now works. Went back to desktop shortcut and set to run as admin in properties > advance

Thanks Dave, I was aware of your link, and did follow that procedure . This is confusing ; "6) The CWGet install program also installs DXSOFTEX.DLL" as the download link is just an unzipped exe and wo

I cant seem to get this working. If I use EXDEMO from the dxs-ech package, I see the terminal created follow the cwget print. I do have 2 x cwget running together , one connected to CP2105 usb audio,