Yes, it's an original Orion. I thought of using the headphone jack, but since line out is available at the Aux I/O, I think right now my plan is to pick off the pin 6 audio. I have a male 8-pin DIN in

Still working on getting dual rcv for RTTY using my Orion... WW is using a USB soundcard while the on-board card handles the Windows beeps and boops, plus Joe DX. That card has an input that I'm not u

I remember a few posts about running dual receive on RTTY, and would be interested in hearing from anyone who is doing it with a similar setup to mine... Ten-Tec Orion, microham USB Interface II, USB

That fixed it! For some reason only the first macro was entered there, not the second. 73 de Chuck, WS1L -- =================== Chuck Chandler chandlerusm@... ===================

Well, after last month's post about an app not launching, not being found, and CHKDSK finding errors, my hard drive did fail last Sunday. It cost me $80 to get another 500 GB, 7200 RPM drive from Offi

I've read about the SSD's failing after a certain amount of read/writes... is this an issue? 73 de Chuck, WS1L -- =================== Chuck Chandler chandlerusm@... =================== [Non-text

A complete check disk found and replaced some bad sectors. All now works as it should. A review of Event Viewer shows no 1005 errors in the Application Log until today. DXKeeper had no errorlog.txt, a

OK, the free space check found no issues. It is likely a good idea to replace the hard drive. I have seen some RAM disks available - is anyone using them? The process below got DXKeeper running as 10.

OK, as soon as the check disk finishes I'll do that! Thanks, Dave!! -- =================== Chuck Chandler chandlerusm@... =================== [Non-text portions of this message have been removed

I posted earlier that DXK 10.3.7 won't launch. I've done some more checking. First off, I've been away and had the radio PC off. I turned it on Saturday and ran N1MM Logger to play a bit in the NAQP.

Via Launcher it times out at 180 seconds, followed by the windows error box 'DXKeeper has encountered an error and needs to close'. After that I re-booted the PC, same behavior. Double-clicking the DX

I read the recent thread about over-writing QSO-entered data with callbook data with interest... in th epast, if I mis-copied a call, then I woul dhave to clear the capture window and start over, sinc

I am playing around in the CQ VHF contest today... must not be a lot of EM51's QRV, as I am popular! I ran my VUCC Progress Report (19 new grids so far, taking me to 59 grids total) and I see 5 grids

Indeed, checking further showed that I have no active subscription. Odd that I didn't get any reminder, but now I know what to look for! 73 de Chuck, WS1L -- =================== Chuck Chandler chandle

Tonight I am getting an error message from DXKeeper like: Callbook Error: A subscription is required to access the full data I am logged in to Pathfinder with my XML account. I terminated and restarte

I just did my first on-line DXCC application and will be taking the cards to a local checker this weekend. It was very easy and I only had 14 QSOs so it was overkill to have DXKeeper make an ADIF to u

I'm helping another DXabs user, Stan, N5UE, get up to speed with the DXLabs suite. He has some old QSO's that were never entered into a computer log, but are present in his LotW account as credits...

After some searching I found Office Depot has a HP 20 inch with 1600:900 resolution on sale for the next few days for $99.99 (includes $40 instant rebate.) Good deal, now I will have two with the same

I have been in the process of re-doing the antenna switching in my shack... nothing as complex as diode matrices or such, but a set of manual switches that pretty much allow any antenna to be used by

OK, thanks, Dave! 73 de Chuck, WS1L